<B>Capacitors - Fixed, Variable, Trimmers Chip, 1.00 X 0.50 X 0.60 mm body <p>Chip package with body size 1.00 X 0.50 X 0.60 mm</p> >NAME >VALUE Chip, 1.17 X 1.02 X 1.02 mm body <p>Chip package with body size 1.17 X 1.02 X 1.02 mm</p> >NAME >VALUE Chip, 1.60 X 0.80 X 0.85 mm body <p>Chip package with body size 1.60 X 0.80 X 0.85 mm</p> >NAME >VALUE Chip, 2.00 X 1.25 X 1.10 mm body <p>Chip package with body size 2.00 X 1.25 X 1.10 mm</p> >NAME >VALUE Chip, 3.20 X 1.60 X 1.35 mm body <p>Chip package with body size 3.20 X 1.60 X 1.35 mm</p> >NAME >VALUE Chip, 3.20 X 2.50 X 1.35 mm body <p>Chip package with body size 3.20 X 2.50 X 1.35 mm</p> >NAME >VALUE Chip, 4.50 X 3.20 X 1.35 mm body <p>Chip package with body size 4.50 X 3.20 X 1.35 mm</p> >NAME >VALUE Molded Body, 3.20 X 1.60 X 1.80 mm body <p>Molded Body package with body size 3.20 X 1.60 X 1.80 mm</p> >NAME >VALUE Molded Body, 3.50 X 2.80 X 2.10 mm body <p>Molded Body package with body size 3.50 X 2.80 X 2.10 mm</p> >NAME >VALUE Molded Body, 6.00 X 3.20 X 2.80 mm body <p>Molded Body package with body size 6.00 X 3.20 X 2.80 mm</p> >NAME >VALUE Molded Body, 7.30 X 4.30 X 3.10 mm body <p>Molded Body package with body size 7.30 X 4.30 X 3.10 mm</p> >NAME >VALUE Chip, 4.50 X 6.40 X 1.10 mm body <p>Chip package with body size 4.50 X 6.40 X 1.10 mm</p> >NAME >VALUE Radial Non-Polarized Capacitor, 5.50 mm pitch, 10.25 mm body diameter, 12.50 mm body height <p>Radial Non-Polarized Capacitor package with 5.50 mm pitch (lead spacing), 0.60 mm lead diameter, 10.25 mm body diameter and 12.50 mm body height</p> >NAME >VALUE Radial Non-Polarized Capacitor, 22.61 mm pitch, 50.80 mm body diameter, 55.55 mm body height <p>Radial Non-Polarized Capacitor package with 22.61 mm pitch (lead spacing), 2.40 mm lead diameter, 50.80 mm body diameter and 55.55 mm body height</p> >NAME >VALUE Molded Body, 3.20 X 1.60 X 1.80 mm body <p>Molded Body package with body size 3.20 X 1.60 X 1.80 mm</p> >NAME >VALUE Molded Body, 3.50 X 2.80 X 2.10 mm body <p>Molded Body package with body size 3.50 X 2.80 X 2.10 mm</p> >NAME >VALUE Molded Body, 6.00 X 3.20 X 2.80 mm body <p>Molded Body package with body size 6.00 X 3.20 X 2.80 mm</p> >NAME >VALUE Molded Body, 7.30 X 4.30 X 3.10 mm body <p>Molded Body package with body size 7.30 X 4.30 X 3.10 mm</p> >NAME >VALUE Radial Polarized Capacitor, 5.08 mm pitch, 10.00 mm body diameter, 11.00 mm body height <p>Radial Polarized Capacitor package with 5.08 mm pitch (lead spacing), 0.65 mm lead diameter, 10.00 mm body diameter and 11.00 mm body height</p> >NAME >VALUE ECAP (Aluminum Electrolytic Capacitor), 10.30 X 10.50 mm body <p>ECAP (Aluminum Electrolytic Capacitor) package with body size 10.30 X 10.50 mm</p> >NAME >VALUE ECAP (Aluminum Electrolytic Capacitor), 8.30 X 10.50 mm body <p>ECAP (Aluminum Electrolytic Capacitor) package with body size 8.30 X 10.50 mm</p> >NAME >VALUE Radial Polarized Capacitor, 10.00 mm pitch, 22.75 mm body diameter, 32.00 mm body height <p>Radial Polarized Capacitor package with 10.00 mm pitch (lead spacing), 1.00 mm lead diameter, 22.75 mm body diameter and 32.00 mm body height</p> >NAME >VALUE ECAP (Aluminum Electrolytic Capacitor), 19.05 X 16.60 mm body <p>ECAP (Aluminum Electrolytic Capacitor) package with body size 19.05 X 16.60 mm</p> >NAME >VALUE Radial Polarized Capacitor, 5.50 mm pitch, 12.50 mm body diameter, 25.00 mm body height <p>Radial Polarized Capacitor package with 5.50 mm pitch (lead spacing), 1.10 mm lead diameter, 12.50 mm body diameter and 25.00 mm body height</p> >NAME >VALUE Radial Polarized Capacitor, 5.50 mm pitch, 12.00 mm body diameter, 20.00 mm body height <p>Radial Polarized Capacitor package with 5.50 mm pitch (lead spacing), 0.60 mm lead diameter, 12.00 mm body diameter and 20.00 mm body height</p> >NAME >VALUE Molded Body, 7.42 X 4.35 X 4.30 mm body <p>Molded Body package with body size 7.42 X 4.35 X 4.30 mm</p> >NAME >VALUE Axial Polarized Capacitor, 34.10 mm pitch, 30.25 mm body length, 18.25 mm body diameter <p>Axial Polarized Capacitor package with 34.10 mm pitch (lead spacing), 0.80 mm lead diameter, 30.25 mm body length and 18.25 mm body diameter</p> >NAME >VALUE Chip, 1.00 X 0.50 X 0.60 mm body <p>Chip package with body size 1.00 X 0.50 X 0.60 mm</p> Chip, 1.17 X 1.02 X 1.02 mm body <p>Chip package with body size 1.17 X 1.02 X 1.02 mm</p> Chip, 1.60 X 0.80 X 0.85 mm body <p>Chip package with body size 1.60 X 0.80 X 0.85 mm</p> Chip, 2.00 X 1.25 X 1.10 mm body <p>Chip package with body size 2.00 X 1.25 X 1.10 mm</p> Chip, 3.20 X 1.60 X 1.35 mm body <p>Chip package with body size 3.20 X 1.60 X 1.35 mm</p> Chip, 3.20 X 2.50 X 1.35 mm body <p>Chip package with body size 3.20 X 2.50 X 1.35 mm</p> Chip, 4.50 X 3.20 X 1.35 mm body <p>Chip package with body size 4.50 X 3.20 X 1.35 mm</p> Molded Body, 3.20 X 1.60 X 1.80 mm body <p>Molded Body package with body size 3.20 X 1.60 X 1.80 mm</p> Molded Body, 3.50 X 2.80 X 2.10 mm body <p>Molded Body package with body size 3.50 X 2.80 X 2.10 mm</p> Molded Body, 6.00 X 3.20 X 2.80 mm body <p>Molded Body package with body size 6.00 X 3.20 X 2.80 mm</p> Molded Body, 7.30 X 4.30 X 3.10 mm body <p>Molded Body package with body size 7.30 X 4.30 X 3.10 mm</p> Chip, 4.50 X 6.40 X 1.10 mm body <p>Chip package with body size 4.50 X 6.40 X 1.10 mm</p> Radial Non-Polarized Capacitor, 5.50 mm pitch, 10.25 mm body diameter, 12.50 mm body height <p>Radial Non-Polarized Capacitor package with 5.50 mm pitch (lead spacing), 0.60 mm lead diameter, 10.25 mm body diameter and 12.50 mm body height</p> Radial Non-Polarized Capacitor, 22.61 mm pitch, 50.80 mm body diameter, 55.55 mm body height <p>Radial Non-Polarized Capacitor package with 22.61 mm pitch (lead spacing), 2.40 mm lead diameter, 50.80 mm body diameter and 55.55 mm body height</p> Molded Body, 3.20 X 1.60 X 1.80 mm body <p>Molded Body package with body size 3.20 X 1.60 X 1.80 mm</p> Molded Body, 3.50 X 2.80 X 2.10 mm body <p>Molded Body package with body size 3.50 X 2.80 X 2.10 mm</p> Molded Body, 6.00 X 3.20 X 2.80 mm body <p>Molded Body package with body size 6.00 X 3.20 X 2.80 mm</p> Molded Body, 7.30 X 4.30 X 3.10 mm body <p>Molded Body package with body size 7.30 X 4.30 X 3.10 mm</p> Radial Polarized Capacitor, 5.08 mm pitch, 10.00 mm body diameter, 11.00 mm body height <p>Radial Polarized Capacitor package with 5.08 mm pitch (lead spacing), 0.65 mm lead diameter, 10.00 mm body diameter and 11.00 mm body height</p> ECAP (Aluminum Electrolytic Capacitor), 10.30 X 10.50 mm body <p>ECAP (Aluminum Electrolytic Capacitor) package with body size 10.30 X 10.50 mm</p> ECAP (Aluminum Electrolytic Capacitor), 8.30 X 10.50 mm body <p>ECAP (Aluminum Electrolytic Capacitor) package with body size 8.30 X 10.50 mm</p> Radial Polarized Capacitor, 10.00 mm pitch, 22.75 mm body diameter, 32.00 mm body height <p>Radial Polarized Capacitor package with 10.00 mm pitch (lead spacing), 1.00 mm lead diameter, 22.75 mm body diameter and 32.00 mm body height</p> ECAP (Aluminum Electrolytic Capacitor), 19.05 X 16.60 mm body <p>ECAP (Aluminum Electrolytic Capacitor) package with body size 19.05 X 16.60 mm</p> Radial Polarized Capacitor, 5.50 mm pitch, 12.50 mm body diameter, 25.00 mm body height <p>Radial Polarized Capacitor package with 5.50 mm pitch (lead spacing), 1.10 mm lead diameter, 12.50 mm body diameter and 25.00 mm body height</p> Radial Polarized Capacitor, 5.50 mm pitch, 12.00 mm body diameter, 20.00 mm body height <p>Radial Polarized Capacitor package with 5.50 mm pitch (lead spacing), 0.60 mm lead diameter, 12.00 mm body diameter and 20.00 mm body height</p> Molded Body, 7.42 X 4.35 X 4.30 mm body <p>Molded Body package with body size 7.42 X 4.35 X 4.30 mm</p> Axial Polarized Capacitor, 34.10 mm pitch, 30.25 mm body length, 18.25 mm body diameter <p>Axial Polarized Capacitor package with 34.10 mm pitch (lead spacing), 0.80 mm lead diameter, 30.25 mm body length and 18.25 mm body diameter</p> Capacitor >NAME >SPICEMODEL >VALUE >SPICEEXTRA >NAME + >VALUE <B>Capacitor - Generic <B>Capacitor Polarised - Generic <h3> PCBLayout.com - Frequently Used <i>Diodes</i></h3> Visit us at <a href="http://www.PCBLayout.com">PCBLayout.com</a> for quick and hassle-free PCB Layout/Manufacturing ordering experience. <BR> <BR> This library has been generated by our experienced pcb layout engineers using current IPC and/or industry standards. We <b>believe</b> the content to be accurate, complete and current. But, this content is provided as a courtesy and <u>user assumes all risk and responsiblity of it's usage</u>. <BR> <BR> Feel free to contact us at <a href="mailto:Support@PCBLayout.com">Support@PCBLayout.com</a> if you have any questions/concerns regarding any of our content or services. >NAME >VALUE >NAME >VALUE <h3> DIODE SCHOTTKY 60V 3A DO201AD</h3> <BR> <a href="https://www.onsemi.com/pub/Collateral/MBR350-D.PDF"> Manufacturer's datasheet</a> <b>Inductors and Filters</b><p> Based on the previous library ind-a.lbr<p> <author>Created by librarian@cadsoft.de</author> <b>High Power Density, High Efficiency, Shielded Inductors</b><p> Source: coiltronics_dr_series.pdf >NAME >VALUE High Power Density, High Efficiency, Shielded Inductors Source: coiltronics_dr_series.pdf >NAME >VALUE <b>High Power Density, High Efficiency, Shielded Inductors</b><p> Source: coiltronics_dr_series.pdf Default symbols for import LTspice schematics<p> 2012-10-29 alf@cadsoft.de<br> <b>RESISTOR</b><p> type 0204, grid 7.5 mm >NAME >VALUE <b>RESISTOR</b><p> type 0207, grid 10 mm >NAME >VALUE <b>RESISTOR</b> chip<p> Source: http://www.vishay.com/docs/20008/dcrcw.pdf >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b><p> >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p> Source: http://www.vishay.com .. dcrcw.pdf >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>Package 4527</b><p> Source: http://www.vishay.com/docs/31059/wsrhigh.pdf >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b><p> Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf >NAME >VALUE RESISTOR type 0204, grid 7.5 mm RESISTOR type 0207, grid 10 mm RESISTOR chip Source: http://www.vishay.com/docs/20008/dcrcw.pdf RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR CRCW1218 Thick Film, Rectangular Chip Resistors Source: http://www.vishay.com .. dcrcw.pdf RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf Package 4527 Source: http://www.vishay.com/docs/31059/wsrhigh.pdf >NAME >VALUE SpiceOrder 1 SpiceOrder 2 <B>RESISTOR</B>, European symbol <b>Supply Symbols</b><p> GND, VCC, 0V, +5V, -5V, etc.<p> Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals.<p> The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> <author>Created by librarian@cadsoft.de</author> >VALUE <b>SUPPLY SYMBOL</b> <h3>SparkFun Connectors</h3> This library contains electrically-functional connectors. <br> <br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. <br> <br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. <br> <br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br> <br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Plated Through Hole</h3> <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>Molex 2-Pin Plated Through-Hole</h3> <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3> <p>Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>JST-Right Angle Male Header SMT</h3> <p>Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 2mm</li> </ul></p> <p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> <li>JST_2MM_MALE</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole</h3> <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.15"</li> </ul></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>JST-Vertical Male Header SMT </h3> <p>Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 2mm</li> </ul></p> <p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >Name >Value <h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3> <p>Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 5mm/197mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - Locking Footprint</h3> Holes are staggered by 0.005" from center to hold pins while soldering. <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3> Holes are offset from center by 0.005" to hold pins in place during soldering. <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - Long Pads with Locking Footprint</h3> Pins are staggered by 0.005" from center to hold pins in place while soldering. <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3> Holes are offset from center 0.005" to hold pins in place during soldering. <p>Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - Long Pads without Silk Outline</h3> <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - No Silk Outline</h3> <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>JST 2 Pin Right Angle Plated Through Hole</h3> tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. <p>Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch:2mm</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >Name >Value + - <h3>Plated Through Hole - 0.1" holes</h3> <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.2"</li> </ul></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>Pogo Pins Connector - No Silk Outline</h3> <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3> <p>Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE <h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3> tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. <br> No silk outline of connector. <p>Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch:2mm</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >Name >Value + - <h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3> tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. <br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. <br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. <p>Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch:2mm</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >Name >Value + - <h3>Spring Terminal- PCB Mount 2 Pin PTH</h3> tDocu marks the spring arms <p>Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 0.1"</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> <h3>2 Pin Screw Terminal - 2.54mm</h3> <p>Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_02</li> </ul></p> >NAME >VALUE 2 pin poke-home connector part number 2062-2P from STA >NAME >VALUE >NAME >VALUE <h3>Plated Through Hole - 4 Pin</h3> <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>Molex 4-Pin Plated Through-Hole</h3> <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -4 Pin PTH</h3> <p>Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 4 Pin</h3> <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch: 1.27mm</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 4 Pin Locking Footprint</h3> Pins are offset 0.005" from center to lock pins in place during soldering. <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint</h3> Holes are offset 0.005" from center to lock pins in place during soldering. <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>Molex 4-Pin Plated Through-Hole Locking</h3> Holes are offset 0.005" from center to hold pins in place during soldering. <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>SMD - 4 Pin Right Angle Male Header</h3> tDocu layer shows pin locations. <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 4 Pin Long Pads</h3> <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 4 Pin No Silk Outline</h3> <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>JST Right Angle 4 Pin Plated Through Hole</h3> <p>Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 2mm</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> + - S S >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -4 Pin PTH Locking</h3> Holes are offset 0.005" from center to hold pins in place during soldering. <p>Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>SMD- 4 Pin Right Angle </h3> <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>SMD - 4 Pin Vertical Connector</h3> <p>Specifications: <ul><li>Pin count:4</li> <li>SMD Pad count:8</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>SMD - 4 Pin w/ Long Solder Pads</h3> No silk, but tDocu layer shows pin position. <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> <h3>JST Vertical 4 Pin Plated Through Hole</h3> <p>Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 2mm</li> </ul></p> <p><a href="http://www.jst-mfg.com/product/pdf/eng/ePH.pdf">Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> + - Y B >NAME >VALUE <h3>SMD - 4 Pin Right-Angle Female Header</h3> Silk outline shows header location. <p>Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_04</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 6 Pin</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Molex 6-Pin Plated Through-Hole</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Molex 6-Pin Plated Through-Hole Right Angle</h3> tPlace shows angle of connector. <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>SMD - 6 Pin Right Angle Male Header</h3> tDocu layer shows pin locations. <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 6 Pin with Locking Footprint</h3> Holes are offset 0.005" from center, locking pins in place during soldering. <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 6 Pin with Locking Footprint with Long Pads</h3> Holes are offset 0.005" from center, locking pins in place during soldering. <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Molex 6-Pin Plated Through-Hole Locking Footprint</h3> Holes are offset 0.005" from center to hold pins in place during soldering. <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint</h3> Holes are offset 0.005" from center to hold pins in place during soldering. tPlace shows location of connector. <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 6 Pin Locking Header</h3> Includes silk outline for 6 pin female header <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint:</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 6 Pin with Long Pads</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -6 Pin PTH</h3> <p>Specifications: <ul><li>Pin count: 6</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Header - 6 pin Female SMD</h3> Right angle 0.1" <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/19686.pdf”>Datasheet referenced for footprint:</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3> 6 Pin Holes</h3> No silk, no plating <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> <h3> 6 Pin SMD Female Header</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3> 6 Pin SMD Female Header</h3> Alternate pin configuration <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3> 6 Pin SMD Female Header - Combined Footprint</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3> 6 Pin SMD Male Header</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint:</a></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>JST SH Vertical 6-Pin Connector -SMD</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:1mm</li> <p><b><a href="https://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf">Datasheet referenced for footprint</a></b></p> </ul></p> <p>Example device(s): <ul><li>CONN_06</li> <li>EM-406</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 6 Pin No Silk Outline</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 6 Pin</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:1.27mm</li> </ul></p> <p>Example device(s): <ul><li>CONN_06</li> </ul></p> >NAME >VALUE Plated Through Hole Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 Molex 2-Pin Plated Through-Hole Specifications: Pin count:2 Pin pitch:0.1" Datasheet referenced for footprint Example device(s): CONN_02 Screw Terminal 3.5mm Pitch - 2 Pin PTH Specifications: Pin count: 2 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_02 JST-Right Angle Male Header SMT Specifications: Pin count: 2 Pin pitch: 2mm Datasheet referenced for footprint Example device(s): CONN_02 JST_2MM_MALE Plated Through Hole Specifications: Pin count:2 Pin pitch:0.15" Example device(s): CONN_02 JST-Vertical Male Header SMT Specifications: Pin count: 2 Pin pitch: 2mm Datasheet referenced for footprint Example device(s): CONN_02 Screw Terminal 5mm Pitch -2 Pin PTH Specifications: Pin count: 2 Pin pitch: 5mm/197mil Datasheet referenced for footprint Example device(s): CONN_02 Plated Through Hole - Locking Footprint Holes are staggered by 0.005" from center to hold pins while soldering. Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 Molex 2-Pin Plated Through-Hole Locking Footprint Holes are offset from center by 0.005" to hold pins in place during soldering. Specifications: Pin count:2 Pin pitch:0.1" Datasheet referenced for footprint Example device(s): CONN_02 Plated Through Hole - Long Pads with Locking Footprint Pins are staggered by 0.005" from center to hold pins in place while soldering. Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking Holes are offset from center 0.005" to hold pins in place during soldering. Specifications: Pin count: 2 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_02 Plated Through Hole - Long Pads without Silk Outline Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 Plated Through Hole - No Silk Outline Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 JST 2 Pin Right Angle Plated Through Hole tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. Specifications: Pin count: 2 Pin pitch:2mm Datasheet referenced for footprint Example device(s): CONN_02 Plated Through Hole - 0.1" holes Specifications: Pin count:2 Pin pitch:0.2" Example device(s): CONN_02 Pogo Pins Connector - No Silk Outline Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline Specifications: Pin count: 2 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_02 JST 2 Pin Right Angle Plated Through Hole- No Silk tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. No silk outline of connector. Specifications: Pin count: 2 Pin pitch:2mm Datasheet referenced for footprint Example device(s): CONN_02 JST 2 Pin Right Angle Plated Through Hole - KIT tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. Specifications: Pin count: 2 Pin pitch:2mm Datasheet referenced for footprint Example device(s): CONN_02 Spring Terminal- PCB Mount 2 Pin PTH tDocu marks the spring arms Specifications: Pin count: 4 Pin pitch: 0.1" Datasheet referenced for footprint Example device(s): CONN_02 2 Pin Screw Terminal - 2.54mm Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 2 pin poke-home connector part number 2062-2P from STA Plated Through Hole - 4 Pin Specifications: Pin count:4 Pin pitch:0.1" Example device(s): CONN_04 Molex 4-Pin Plated Through-Hole Specifications: Pin count:4 Pin pitch:0.1" Datasheet referenced for footprint Example device(s): CONN_04 Screw Terminal 3.5mm Pitch -4 Pin PTH Specifications: Pin count: 4 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_04 Plated Through Hole - 4 Pin Specifications: Pin count:4 Pin pitch: 1.27mm Example device(s): CONN_04 Plated Through Hole - 4 Pin Locking Footprint Pins are offset 0.005" from center to lock pins in place during soldering. Specifications: Pin count:4 Pin pitch:0.1" Example device(s): CONN_04 Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint Holes are offset 0.005" from center to lock pins in place during soldering. Specifications: Pin count:4 Pin pitch:0.1" Example device(s): CONN_04 Molex 4-Pin Plated Through-Hole Locking Holes are offset 0.005" from center to hold pins in place during soldering. Specifications: Pin count:4 Pin pitch:0.1" Datasheet referenced for footprint Example device(s): CONN_04 SMD - 4 Pin Right Angle Male Header tDocu layer shows pin locations. Specifications: Pin count:4 Pin pitch:0.1" Example device(s): CONN_04 Plated Through Hole - 4 Pin Long Pads Specifications: Pin count:4 Pin pitch:0.1" Example device(s): CONN_04 Plated Through Hole - 4 Pin No Silk Outline Specifications: Pin count:4 Pin pitch:0.1" Example device(s): CONN_04 JST Right Angle 4 Pin Plated Through Hole Specifications: Pin count: 4 Pin pitch: 2mm Datasheet referenced for footprint Example device(s): CONN_04 Screw Terminal 3.5mm Pitch -4 Pin PTH Locking Holes are offset 0.005" from center to hold pins in place during soldering. Specifications: Pin count: 4 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_04 SMD- 4 Pin Right Angle Specifications: Pin count:4 Pin pitch:0.1" Example device(s): CONN_04 SMD - 4 Pin Vertical Connector Specifications: Pin count:4 SMD Pad count:8 Pin pitch:0.1" Example device(s): CONN_04 SMD - 4 Pin w/ Long Solder Pads No silk, but tDocu layer shows pin position. Specifications: Pin count:4 Pin pitch:0.1" Example device(s): CONN_04 JST Vertical 4 Pin Plated Through Hole Specifications: Pin count: 4 Pin pitch: 2mm Datasheet referenced for footprint Example device(s): CONN_04 SMD - 4 Pin Right-Angle Female Header Silk outline shows header location. Specifications: Pin count:4 Pin pitch:0.1" Example device(s): CONN_04 Plated Through Hole - 6 Pin Specifications: Pin count:6 Pin pitch:0.1" Example device(s): CONN_06 Molex 6-Pin Plated Through-Hole Specifications: Pin count:6 Pin pitch:0.1" Datasheet referenced for footprint Example device(s): CONN_06 Molex 6-Pin Plated Through-Hole Right Angle tPlace shows angle of connector. Specifications: Pin count:6 Pin pitch:0.1" Datasheet referenced for footprint Example device(s): CONN_06 SMD - 6 Pin Right Angle Male Header tDocu layer shows pin locations. Specifications: Pin count:6 Pin pitch:0.1" Example device(s): CONN_06 Plated Through Hole - 6 Pin with Locking Footprint Holes are offset 0.005" from center, locking pins in place during soldering. Specifications: Pin count:6 Pin pitch:0.1" Example device(s): CONN_06 Plated Through Hole - 6 Pin with Locking Footprint with Long Pads Holes are offset 0.005" from center, locking pins in place during soldering. Specifications: Pin count:6 Pin pitch:0.1" Example device(s): CONN_06 Molex 6-Pin Plated Through-Hole Locking Footprint Holes are offset 0.005" from center to hold pins in place during soldering. Specifications: Pin count:6 Pin pitch:0.1" Datasheet referenced for footprint Example device(s): CONN_06 Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint Holes are offset 0.005" from center to hold pins in place during soldering. tPlace shows location of connector. Specifications: Pin count:6 Pin pitch:0.1" Datasheet referenced for footprint Example device(s): CONN_06 Plated Through Hole - 6 Pin Locking Header Includes silk outline for 6 pin female header Specifications: Pin count:6 Pin pitch:0.1" Datasheet referenced for footprint: Example device(s): CONN_06 Plated Through Hole - 6 Pin with Long Pads Specifications: Pin count:6 Pin pitch:0.1" Example device(s): CONN_06 Screw Terminal 3.5mm Pitch -6 Pin PTH Specifications: Pin count: 6 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_06 Header - 6 pin Female SMD Right angle 0.1" Specifications: Pin count:6 Pin pitch:0.1" Datasheet referenced for footprint: Example device(s): CONN_06 6 Pin Holes No silk, no plating Specifications: Pin count:6 Pin pitch:0.1" Example device(s): CONN_06 6 Pin SMD Female Header Specifications: Pin count:6 Pin pitch:0.1" Datasheet referenced for footprint: Example device(s): CONN_06 6 Pin SMD Female Header Alternate pin configuration Specifications: Pin count:6 Pin pitch:0.1" Datasheet referenced for footprint: Example device(s): CONN_06 6 Pin SMD Female Header - Combined Footprint Specifications: Pin count:6 Pin pitch:0.1" Datasheet referenced for footprint: Example device(s): CONN_06 6 Pin SMD Male Header Specifications: Pin count:6 Pin pitch:0.1" Datasheet referenced for footprint: Example device(s): CONN_06 JST SH Vertical 6-Pin Connector -SMD Specifications: Pin count:6 Pin pitch:1mm Datasheet referenced for footprint Example device(s): CONN_06 EM-406 Plated Through Hole - 6 Pin No Silk Outline Specifications: Pin count:6 Pin pitch:0.1" Example device(s): CONN_06 Plated Through Hole - 6 Pin Specifications: Pin count:6 Pin pitch:1.27mm Example device(s): CONN_06 <h3>2 Pin Connection</h3> >VALUE >NAME <h3>4 Pin Connection</h3> >VALUE >NAME <h3>6 Pin Connection</h3> >VALUE >NAME <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> <p></p> <b>On any of the 0.1 inch spaced packages, you can populate with these:</b> <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> </ul> <p></p> <b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b> <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> <p></p> <b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b> <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> <p></p> </ul> <p></p> <b>Special notes:</b> Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br> 2.54_SCREWTERM for use with PRT-10571.<br><br> 3.5mm Screw Terminal footprints for PRT-08084<br><br> 5mm Screw Terminal footprints for use with PRT-08432 <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> <p></p> <b>On any of the 0.1 inch spaced packages, you can populate with these:</b> <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> </ul> <p></p> <b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b> <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> <p></p> <b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b> <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> <p></p> </ul> <p></p> <b>Special notes:</b> <p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> <p></p> <b>On any of the 0.1 inch spaced packages, you can populate with these:</b> <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> <li><a href="https://www.sparkfun.com/products/9280"> Arduino Stackable Header - 6 Pin</a> (PRT-09280)</li> </ul> <p></p> <b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b> <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> <p></p> <b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b> <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> <p></p> </ul> Molded Body, 5.00 X 2.70 X 2.20 mm body <p>Molded Body package with body size 5.00 X 2.70 X 2.20 mm</p> >NAME >VALUE ECAP (Aluminum Electrolytic Capacitor), 12.30 X 12.50 mm body <p>ECAP (Aluminum Electrolytic Capacitor) package with body size 12.30 X 12.50 mm</p> >NAME >VALUE <b>SMD DIL08</b> Gull Wing Surface Mount Optioon 300<p> Source: http://www.avagotech.com/docs/AV02-0410EN >NAME >VALUE 8-DIP, 2.54 mm (0.10 in) pitch, 8.26 mm (0.33 in) span, 9.38 X 6.99 X 4.58 mm body <p>8-pin DIP package with 2.54 mm (0.10 in) pitch, 8.26 mm (0.33 in) span with body size 9.38 X 6.99 X 4.58 mm</p> >NAME >VALUE >NAME >VALUE Molded Body, 5.00 X 2.70 X 2.20 mm body <p>Molded Body package with body size 5.00 X 2.70 X 2.20 mm</p> ECAP (Aluminum Electrolytic Capacitor), 12.30 X 12.50 mm body <p>ECAP (Aluminum Electrolytic Capacitor) package with body size 12.30 X 12.50 mm</p> <b>SMD DIL08</b> <p> dual in line package' 8-DIP, 2.54 mm (0.10 in) pitch, 8.26 mm (0.33 in) span, 9.38 X 6.99 X 4.58 mm body <p>8-pin DIP package with 2.54 mm (0.10 in) pitch, 8.26 mm (0.33 in) span with body size 9.38 X 6.99 X 4.58 mm</p> >NAME >VALUE + >NAME >VALUE The MAX5035 easy-to-use, high-efficiency, high-volt-age, step-down DC-DC converter operates from aninput voltage up to 76V and consumes only 270μA qui-escent current at no load. >NAME >VALUE XT60 connector >NAME >VALUE TVS protective diode The MAX5035 easy-to-use, high-efficiency, high-volt-age, step-down DC-DC converter operates from aninput voltage up to 76V and consumes only 270μA qui-escent current at no load. <B>BJT, JFET, MOSFET, UJT, Darlington <b>SOT-23</b> >NAME >VALUE <b>TO 92</b> >NAME >VALUE 2 3 1 <b>Molded Package</b><p> grid 2.54 mm >NAME >VALUE <b>DPAK</b><p>Style 3 (Motorola) >NAME >VALUE 3-SOT23, 0.95 mm pitch, 2.37 mm span, 2.86 X 1.28 X 1.12 mm body <p>3-pin SOT23 package with 0.95 mm pitch, 2.37 mm span with body size 2.86 X 1.28 X 1.12 mm</p> >NAME >VALUE <b>ROHM : SMT3 ; EIAJ : SC-59</b> >NAME >VALUE <b>SC70-3 Reflow soldering</b><p> Philips SC01_Mounting_1996.pdf<p> ROHM : UMT3 ; EIAJ : SC-70 >NAME >VALUE <b>TO 18</b> >NAME >VALUE 1 2 3 SOT-23 TO 92 Molded Package grid 2.54 mm <b>DPAK</b><p>Style 3 (Motorola) 3-SOT23, 0.95 mm pitch, 2.37 mm span, 2.86 X 1.28 X 1.12 mm body <p>3-pin SOT23 package with 0.95 mm pitch, 2.37 mm span with body size 2.86 X 1.28 X 1.12 mm</p> ROHM : SMT3 ; EIAJ : SC-59 SC70-3 Reflow soldering Philips SC01_Mounting_1996.pdf ROHM : UMT3 ; EIAJ : SC-70 TO 18 >NAME >VALUE D S G >NAME >VALUE D S G >NAME >VALUE >SPICEMODEL >SPICEEXTRA <b>P-Channel MOSFET - Generic</b> <b> N-Channel MOSFET - Generic <B>NPN - Generic ********************** * Autodesk EAGLE - Spice Model File * Date: 9/17/17 * basic npn intrinsic model ********************** .MODEL QNPN NPN Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version. Since Version 8.4, EAGLE supports properties for SPICE simulation. Probes in schematics and SPICE mapping objects found in parts and library devices will not be understood with this version. Update EAGLE to the latest version for full support of SPICE simulation.