Fix stop sensor schematics

- Make stop sensor LOW by default, connected to GND.
- Add control transistor for break on BLDC

schematic/ECU.b#1

@@ -1105,11 +1105,11 @@ design rules under a new name.</description>
 <attribute name="SF_SKU" value="COM-07950" x="12.7" y="7.81" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="VALUE" x="12.7" y="2.222" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center"/>
 </element>
-<element name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" package="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M" x="17.5" y="18.5" smashed="yes" rot="MR0">
-<attribute name="NAME" x="18.77" y="19.77" size="1.27" layer="26" rot="MR0"/>
-<attribute name="SPICEMODEL" value="NONE" x="17.5" y="18.5" size="1.778" layer="28" rot="MR0" display="off"/>
-<attribute name="SPICEPREFIX" value="R" x="17.5" y="18.5" size="1.778" layer="28" rot="MR0" display="off"/>
-<attribute name="VALUE" x="18.77" y="15.96" size="1.27" layer="28" rot="MR0"/>
+<element name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" package="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M" x="17.5" y="21.5" smashed="yes" rot="MR0">
+<attribute name="NAME" x="18.77" y="22.77" size="1.27" layer="26" rot="MR0"/>
+<attribute name="SPICEMODEL" value="NONE" x="17.5" y="21.5" size="1.778" layer="28" rot="MR0" display="off"/>
+<attribute name="SPICEPREFIX" value="R" x="17.5" y="21.5" size="1.778" layer="28" rot="MR0" display="off"/>
+<attribute name="VALUE" x="18.77" y="18.96" size="1.27" layer="28" rot="MR0"/>
 </element>
 </elements>
 <signals>
@@ -1153,24 +1153,6 @@ design rules under a new name.</description>
 <wire x1="8.0132" y1="12.8160875" x2="8.0132" y2="9.4732" width="0.8128" layer="16"/>
 <wire x1="8.0132" y1="9.4732" x2="5.08" y2="6.54" width="0.8128" layer="16"/>
 <contactref element="R3" pad="2"/>
-<wire x1="7.34" y1="74.28" x2="11.51" y2="76.39" width="0" layer="19" extent="1-1"/>
-<wire x1="11.43" y1="70.04" x2="7.34" y2="74.28" width="0" layer="19" extent="1-1"/>
-<wire x1="11.43" y1="67.7054" x2="11.43" y2="70.04" width="0" layer="19" extent="16-16"/>
-<wire x1="13.97" y1="62.42" x2="11.43" y2="67.7054" width="0" layer="19" extent="16-16"/>
-<wire x1="17.78" y1="62.572" x2="13.97" y2="62.42" width="0" layer="19" extent="16-16"/>
-<wire x1="2.54" y1="65.77" x2="11.43" y2="67.7054" width="0" layer="19" extent="16-16"/>
-<wire x1="2.54" y1="55.34" x2="2.54" y2="65.77" width="0" layer="19" extent="1-1"/>
-<wire x1="2.54" y1="45.18" x2="2.54" y2="55.34" width="0" layer="19" extent="1-1"/>
-<wire x1="6.29" y1="37.02" x2="2.54" y2="45.18" width="0" layer="19" extent="1-1"/>
-<wire x1="8.89" y1="31.94" x2="6.29" y2="37.02" width="0" layer="19" extent="1-1"/>
-<wire x1="14.9606" y1="21.2212" x2="8.89" y2="31.94" width="0" layer="19" extent="1-1"/>
-<wire x1="16.078" y1="18.5" x2="14.9606" y2="21.2212" width="0" layer="19" extent="16-16"/>
-<wire x1="13.97" y1="17.97" x2="16.078" y2="18.5" width="0" layer="19" extent="16-16"/>
-<wire x1="17.62" y1="15.4254" x2="16.078" y2="18.5" width="0" layer="19" extent="16-16"/>
-<wire x1="7.45" y1="14.48" x2="13.97" y2="17.97" width="0" layer="19" extent="16-16"/>
-<wire x1="12.7" y1="7.81" x2="5.08" y2="6.54" width="0" layer="19" extent="1-1"/>
-<wire x1="15.95" y1="7.81" x2="12.7" y2="7.81" width="0" layer="19" extent="1-1"/>
-<wire x1="20.91" y1="42.27" x2="6.29" y2="37.02" width="0" layer="19" extent="1-16"/>
 </signal>
 <signal name="VIN">
 <contactref element="U$2" pad="15"/>
@@ -1229,6 +1211,13 @@ design rules under a new name.</description>
 <wire x1="2.54" y1="52.8" x2="6.2571" y2="52.8" width="0.8128" layer="16"/>
 <wire x1="6.2571" y1="52.8" x2="8.7571" y2="50.3" width="0.8128" layer="16"/>
 <wire x1="8.7571" y1="50.3" x2="8.7571" y2="49.8" width="0.8128" layer="16"/>
+<contactref element="J1" pad="2"/>
+<wire x1="8.7571" y1="49.8" x2="10.4571" y2="51.5" width="0.8128" layer="1"/>
+<wire x1="10.4571" y1="51.5" x2="14" y2="51.5" width="0.8128" layer="1"/>
+<via x="14" y="51.5" extent="1-16" drill="0.35"/>
+<wire x1="14" y1="51.5" x2="18.5" y2="47" width="0.8128" layer="16"/>
+<wire x1="18.5" y1="27.68" x2="19.32" y2="26.86" width="0.8128" layer="16"/>
+<wire x1="18.5" y1="47" x2="18.5" y2="27.68" width="0.8128" layer="16"/>
 </signal>
 <signal name="THIN">
 <contactref element="J5" pad="2"/>
@@ -1273,6 +1262,14 @@ design rules under a new name.</description>
 <wire x1="20.05" y1="43.6" x2="21.09" y2="44.64" width="0.8128" layer="1"/>
 <wire x1="21.09" y1="44.64" x2="22.19" y2="44.64" width="0.8128" layer="1"/>
 <wire x1="20.05" y1="29.67" x2="20.05" y2="43.6" width="0.8128" layer="1"/>
+<contactref element="J2" pad="4"/>
+<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
+<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
+<contactref element="R3" pad="1"/>
+<wire x1="18.922" y1="23.922" x2="18.922" y2="21.5" width="0.8128" layer="16"/>
+<wire x1="21.86" y1="26.86" x2="18.922" y2="23.922" width="0.8128" layer="16"/>
+<wire x1="18.922" y1="21.5" x2="18.922" y2="18.078" width="0.8128" layer="16"/>
+<wire x1="18.922" y1="18.078" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
 </signal>
 <signal name="BTN">
 <contactref element="D3" pad="2"/>
@@ -1424,16 +1421,6 @@ design rules under a new name.</description>
 <signal name="GND2">
 <contactref element="U$2" pad="19"/>
 </signal>
-<signal name="STOUT">
-<contactref element="J1" pad="2"/>
-<contactref element="J2" pad="4"/>
-<wire x1="19.32" y1="26.86" x2="19.32" y2="18.5" width="0.8128" layer="16"/>
-<wire x1="19.32" y1="18.5" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
-<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
-<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
-<contactref element="R3" pad="1"/>
-<wire x1="18.922" y1="18.5" x2="19.32" y2="18.5" width="0.8128" layer="16"/>
-</signal>
 </signals>
 <mfgpreviewcolors>
 <mfgpreviewcolor name="soldermaskcolor" color="0xC8008000"/>

schematic/ECU.b#2

@@ -1105,11 +1105,11 @@ design rules under a new name.</description>
 <attribute name="SF_SKU" value="COM-07950" x="12.7" y="7.81" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="VALUE" x="12.7" y="2.222" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center"/>
 </element>
-<element name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" package="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M" x="2" y="-3.5" smashed="yes">
-<attribute name="NAME" x="0.73" y="-2.23" size="1.27" layer="25"/>
-<attribute name="SPICEMODEL" value="NONE" x="2" y="-3.5" size="1.778" layer="27" display="off"/>
-<attribute name="SPICEPREFIX" value="R" x="2" y="-3.5" size="1.778" layer="27" display="off"/>
-<attribute name="VALUE" x="0.73" y="-6.04" size="1.27" layer="27"/>
+<element name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" package="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M" x="17.5" y="18.5" smashed="yes" rot="MR0">
+<attribute name="NAME" x="18.77" y="19.77" size="1.27" layer="26" rot="MR0"/>
+<attribute name="SPICEMODEL" value="NONE" x="17.5" y="18.5" size="1.778" layer="28" rot="MR0" display="off"/>
+<attribute name="SPICEPREFIX" value="R" x="17.5" y="18.5" size="1.778" layer="28" rot="MR0" display="off"/>
+<attribute name="VALUE" x="18.77" y="15.96" size="1.27" layer="28" rot="MR0"/>
 </element>
 </elements>
 <signals>
@@ -1153,24 +1153,6 @@ design rules under a new name.</description>
 <wire x1="8.0132" y1="12.8160875" x2="8.0132" y2="9.4732" width="0.8128" layer="16"/>
 <wire x1="8.0132" y1="9.4732" x2="5.08" y2="6.54" width="0.8128" layer="16"/>
 <contactref element="R3" pad="2"/>
-<wire x1="7.34" y1="74.28" x2="11.51" y2="76.39" width="0" layer="19" extent="1-1"/>
-<wire x1="11.43" y1="70.04" x2="7.34" y2="74.28" width="0" layer="19" extent="1-1"/>
-<wire x1="11.43" y1="67.7054" x2="11.43" y2="70.04" width="0" layer="19" extent="16-16"/>
-<wire x1="13.97" y1="62.42" x2="11.43" y2="67.7054" width="0" layer="19" extent="16-16"/>
-<wire x1="17.78" y1="62.572" x2="13.97" y2="62.42" width="0" layer="19" extent="16-16"/>
-<wire x1="2.54" y1="65.77" x2="11.43" y2="67.7054" width="0" layer="19" extent="16-16"/>
-<wire x1="2.54" y1="55.34" x2="2.54" y2="65.77" width="0" layer="19" extent="1-1"/>
-<wire x1="2.54" y1="45.18" x2="2.54" y2="55.34" width="0" layer="19" extent="1-1"/>
-<wire x1="6.29" y1="37.02" x2="2.54" y2="45.18" width="0" layer="19" extent="1-1"/>
-<wire x1="8.89" y1="31.94" x2="6.29" y2="37.02" width="0" layer="19" extent="1-1"/>
-<wire x1="14.9606" y1="21.2212" x2="8.89" y2="31.94" width="0" layer="19" extent="1-1"/>
-<wire x1="13.97" y1="17.97" x2="14.9606" y2="21.2212" width="0" layer="19" extent="1-1"/>
-<wire x1="17.62" y1="15.4254" x2="13.97" y2="17.97" width="0" layer="19" extent="16-16"/>
-<wire x1="7.45" y1="14.48" x2="13.97" y2="17.97" width="0" layer="19" extent="16-16"/>
-<wire x1="12.7" y1="7.81" x2="5.08" y2="6.54" width="0" layer="19" extent="1-1"/>
-<wire x1="15.95" y1="7.81" x2="12.7" y2="7.81" width="0" layer="19" extent="1-1"/>
-<wire x1="3.422" y1="-3.5" x2="5.08" y2="6.54" width="0" layer="19" extent="1-1"/>
-<wire x1="20.91" y1="42.27" x2="6.29" y2="37.02" width="0" layer="19" extent="1-16"/>
 </signal>
 <signal name="VIN">
 <contactref element="U$2" pad="15"/>
@@ -1229,6 +1211,13 @@ design rules under a new name.</description>
 <wire x1="2.54" y1="52.8" x2="6.2571" y2="52.8" width="0.8128" layer="16"/>
 <wire x1="6.2571" y1="52.8" x2="8.7571" y2="50.3" width="0.8128" layer="16"/>
 <wire x1="8.7571" y1="50.3" x2="8.7571" y2="49.8" width="0.8128" layer="16"/>
+<contactref element="J1" pad="2"/>
+<wire x1="8.7571" y1="49.8" x2="10.4571" y2="51.5" width="0.8128" layer="1"/>
+<wire x1="10.4571" y1="51.5" x2="14" y2="51.5" width="0.8128" layer="1"/>
+<via x="14" y="51.5" extent="1-16" drill="0.35"/>
+<wire x1="14" y1="51.5" x2="18.5" y2="47" width="0.8128" layer="16"/>
+<wire x1="18.5" y1="27.68" x2="19.32" y2="26.86" width="0.8128" layer="16"/>
+<wire x1="18.5" y1="47" x2="18.5" y2="27.68" width="0.8128" layer="16"/>
 </signal>
 <signal name="THIN">
 <contactref element="J5" pad="2"/>
@@ -1273,6 +1262,13 @@ design rules under a new name.</description>
 <wire x1="20.05" y1="43.6" x2="21.09" y2="44.64" width="0.8128" layer="1"/>
 <wire x1="21.09" y1="44.64" x2="22.19" y2="44.64" width="0.8128" layer="1"/>
 <wire x1="20.05" y1="29.67" x2="20.05" y2="43.6" width="0.8128" layer="1"/>
+<contactref element="J2" pad="4"/>
+<wire x1="19.32" y1="18.5" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
+<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
+<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
+<contactref element="R3" pad="1"/>
+<wire x1="19.32" y1="18.5" x2="21.86" y2="26.86" width="0" layer="19" extent="16-16"/>
+<wire x1="18.922" y1="18.5" x2="19.32" y2="18.5" width="0" layer="19" extent="16-16"/>
 </signal>
 <signal name="BTN">
 <contactref element="D3" pad="2"/>
@@ -1424,15 +1420,6 @@ design rules under a new name.</description>
 <signal name="GND2">
 <contactref element="U$2" pad="19"/>
 </signal>
-<signal name="STOUT">
-<contactref element="J1" pad="2"/>
-<contactref element="J2" pad="4"/>
-<wire x1="19.32" y1="26.86" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
-<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
-<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
-<contactref element="R3" pad="1"/>
-<wire x1="0.578" y1="-3.5" x2="21.86" y2="16.7" width="0" layer="19" extent="1-1"/>
-</signal>
 </signals>
 <mfgpreviewcolors>
 <mfgpreviewcolor name="soldermaskcolor" color="0xC8008000"/>

schematic/ECU.b#3

@@ -1105,11 +1105,11 @@ design rules under a new name.</description>
 <attribute name="SF_SKU" value="COM-07950" x="12.7" y="7.81" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="VALUE" x="12.7" y="2.222" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center"/>
 </element>
-<element name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" package="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M" x="2" y="-3.5" smashed="yes">
-<attribute name="NAME" x="0.73" y="-2.23" size="1.27" layer="25"/>
-<attribute name="SPICEMODEL" value="NONE" x="2" y="-3.5" size="1.778" layer="27" display="off"/>
-<attribute name="SPICEPREFIX" value="R" x="2" y="-3.5" size="1.778" layer="27" display="off"/>
-<attribute name="VALUE" x="0.73" y="-6.04" size="1.27" layer="27"/>
+<element name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" package="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M" x="17.5" y="18.5" smashed="yes" rot="MR0">
+<attribute name="NAME" x="18.77" y="19.77" size="1.27" layer="26" rot="MR0"/>
+<attribute name="SPICEMODEL" value="NONE" x="17.5" y="18.5" size="1.778" layer="28" rot="MR0" display="off"/>
+<attribute name="SPICEPREFIX" value="R" x="17.5" y="18.5" size="1.778" layer="28" rot="MR0" display="off"/>
+<attribute name="VALUE" x="18.77" y="15.96" size="1.27" layer="28" rot="MR0"/>
 </element>
 </elements>
 <signals>
@@ -1152,6 +1152,7 @@ design rules under a new name.</description>
 <wire x1="7.45" y1="13.3792875" x2="8.0132" y2="12.8160875" width="0.8128" layer="16"/>
 <wire x1="8.0132" y1="12.8160875" x2="8.0132" y2="9.4732" width="0.8128" layer="16"/>
 <wire x1="8.0132" y1="9.4732" x2="5.08" y2="6.54" width="0.8128" layer="16"/>
+<contactref element="R3" pad="2"/>
 </signal>
 <signal name="VIN">
 <contactref element="U$2" pad="15"/>
@@ -1210,6 +1211,8 @@ design rules under a new name.</description>
 <wire x1="2.54" y1="52.8" x2="6.2571" y2="52.8" width="0.8128" layer="16"/>
 <wire x1="6.2571" y1="52.8" x2="8.7571" y2="50.3" width="0.8128" layer="16"/>
 <wire x1="8.7571" y1="50.3" x2="8.7571" y2="49.8" width="0.8128" layer="16"/>
+<contactref element="J1" pad="2"/>
+<wire x1="19.32" y1="26.86" x2="6.29" y2="42.1" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="THIN">
 <contactref element="J5" pad="2"/>
@@ -1254,6 +1257,13 @@ design rules under a new name.</description>
 <wire x1="20.05" y1="43.6" x2="21.09" y2="44.64" width="0.8128" layer="1"/>
 <wire x1="21.09" y1="44.64" x2="22.19" y2="44.64" width="0.8128" layer="1"/>
 <wire x1="20.05" y1="29.67" x2="20.05" y2="43.6" width="0.8128" layer="1"/>
+<contactref element="J2" pad="4"/>
+<wire x1="19.32" y1="18.5" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
+<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
+<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
+<contactref element="R3" pad="1"/>
+<wire x1="19.32" y1="18.5" x2="21.86" y2="26.86" width="0" layer="19" extent="16-16"/>
+<wire x1="18.922" y1="18.5" x2="19.32" y2="18.5" width="0" layer="19" extent="16-16"/>
 </signal>
 <signal name="BTN">
 <contactref element="D3" pad="2"/>
@@ -1405,15 +1415,6 @@ design rules under a new name.</description>
 <signal name="GND2">
 <contactref element="U$2" pad="19"/>
 </signal>
-<signal name="STOUT">
-<contactref element="J1" pad="2"/>
-<contactref element="J2" pad="4"/>
-<wire x1="19.32" y1="26.86" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
-<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
-<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
-<contactref element="R3" pad="1"/>
-<wire x1="0.578" y1="-3.5" x2="21.86" y2="16.7" width="0" layer="19" extent="1-1"/>
-</signal>
 </signals>
 <mfgpreviewcolors>
 <mfgpreviewcolor name="soldermaskcolor" color="0xC8008000"/>

schematic/ECU.b#4

@@ -1105,6 +1105,12 @@ design rules under a new name.</description>
 <attribute name="SF_SKU" value="COM-07950" x="12.7" y="7.81" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="VALUE" x="12.7" y="2.222" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center"/>
 </element>
+<element name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" package="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M" x="17.5" y="18.5" smashed="yes" rot="MR0">
+<attribute name="NAME" x="18.77" y="19.77" size="1.27" layer="26" rot="MR0"/>
+<attribute name="SPICEMODEL" value="NONE" x="17.5" y="18.5" size="1.778" layer="28" rot="MR0" display="off"/>
+<attribute name="SPICEPREFIX" value="R" x="17.5" y="18.5" size="1.778" layer="28" rot="MR0" display="off"/>
+<attribute name="VALUE" x="18.77" y="15.96" size="1.27" layer="28" rot="MR0"/>
+</element>
 </elements>
 <signals>
 <signal name="3V3">
@@ -1146,6 +1152,7 @@ design rules under a new name.</description>
 <wire x1="7.45" y1="13.3792875" x2="8.0132" y2="12.8160875" width="0.8128" layer="16"/>
 <wire x1="8.0132" y1="12.8160875" x2="8.0132" y2="9.4732" width="0.8128" layer="16"/>
 <wire x1="8.0132" y1="9.4732" x2="5.08" y2="6.54" width="0.8128" layer="16"/>
+<contactref element="R3" pad="2"/>
 </signal>
 <signal name="VIN">
 <contactref element="U$2" pad="15"/>
@@ -1402,9 +1409,12 @@ design rules under a new name.</description>
 <signal name="STOUT">
 <contactref element="J1" pad="2"/>
 <contactref element="J2" pad="4"/>
-<wire x1="19.32" y1="26.86" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
+<wire x1="19.32" y1="26.86" x2="19.32" y2="18.5" width="0.8128" layer="16"/>
+<wire x1="19.32" y1="18.5" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
 <wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
 <wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
+<contactref element="R3" pad="1"/>
+<wire x1="18.922" y1="18.5" x2="19.32" y2="18.5" width="0.8128" layer="16"/>
 </signal>
 </signals>
 <mfgpreviewcolors>

schematic/ECU.b#5

@@ -1105,6 +1105,12 @@ design rules under a new name.</description>
 <attribute name="SF_SKU" value="COM-07950" x="12.7" y="7.81" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="VALUE" x="12.7" y="2.222" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center"/>
 </element>
+<element name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" package="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M" x="17.5" y="18.5" smashed="yes" rot="MR0">
+<attribute name="NAME" x="18.77" y="19.77" size="1.27" layer="26" rot="MR0"/>
+<attribute name="SPICEMODEL" value="NONE" x="17.5" y="18.5" size="1.778" layer="28" rot="MR0" display="off"/>
+<attribute name="SPICEPREFIX" value="R" x="17.5" y="18.5" size="1.778" layer="28" rot="MR0" display="off"/>
+<attribute name="VALUE" x="18.77" y="15.96" size="1.27" layer="28" rot="MR0"/>
+</element>
 </elements>
 <signals>
 <signal name="3V3">
@@ -1146,6 +1152,25 @@ design rules under a new name.</description>
 <wire x1="7.45" y1="13.3792875" x2="8.0132" y2="12.8160875" width="0.8128" layer="16"/>
 <wire x1="8.0132" y1="12.8160875" x2="8.0132" y2="9.4732" width="0.8128" layer="16"/>
 <wire x1="8.0132" y1="9.4732" x2="5.08" y2="6.54" width="0.8128" layer="16"/>
+<contactref element="R3" pad="2"/>
+<wire x1="7.34" y1="74.28" x2="11.51" y2="76.39" width="0" layer="19" extent="1-1"/>
+<wire x1="11.43" y1="70.04" x2="7.34" y2="74.28" width="0" layer="19" extent="1-1"/>
+<wire x1="11.43" y1="67.7054" x2="11.43" y2="70.04" width="0" layer="19" extent="16-16"/>
+<wire x1="13.97" y1="62.42" x2="11.43" y2="67.7054" width="0" layer="19" extent="16-16"/>
+<wire x1="17.78" y1="62.572" x2="13.97" y2="62.42" width="0" layer="19" extent="16-16"/>
+<wire x1="2.54" y1="65.77" x2="11.43" y2="67.7054" width="0" layer="19" extent="16-16"/>
+<wire x1="2.54" y1="55.34" x2="2.54" y2="65.77" width="0" layer="19" extent="1-1"/>
+<wire x1="2.54" y1="45.18" x2="2.54" y2="55.34" width="0" layer="19" extent="1-1"/>
+<wire x1="6.29" y1="37.02" x2="2.54" y2="45.18" width="0" layer="19" extent="1-1"/>
+<wire x1="8.89" y1="31.94" x2="6.29" y2="37.02" width="0" layer="19" extent="1-1"/>
+<wire x1="14.9606" y1="21.2212" x2="8.89" y2="31.94" width="0" layer="19" extent="1-1"/>
+<wire x1="16.078" y1="18.5" x2="14.9606" y2="21.2212" width="0" layer="19" extent="16-16"/>
+<wire x1="13.97" y1="17.97" x2="16.078" y2="18.5" width="0" layer="19" extent="16-16"/>
+<wire x1="17.62" y1="15.4254" x2="16.078" y2="18.5" width="0" layer="19" extent="16-16"/>
+<wire x1="7.45" y1="14.48" x2="13.97" y2="17.97" width="0" layer="19" extent="16-16"/>
+<wire x1="12.7" y1="7.81" x2="5.08" y2="6.54" width="0" layer="19" extent="1-1"/>
+<wire x1="15.95" y1="7.81" x2="12.7" y2="7.81" width="0" layer="19" extent="1-1"/>
+<wire x1="20.91" y1="42.27" x2="6.29" y2="37.02" width="0" layer="19" extent="1-16"/>
 </signal>
 <signal name="VIN">
 <contactref element="U$2" pad="15"/>
@@ -1402,7 +1427,12 @@ design rules under a new name.</description>
 <signal name="STOUT">
 <contactref element="J1" pad="2"/>
 <contactref element="J2" pad="4"/>
-<wire x1="21.86" y1="16.7" x2="19.32" y2="26.86" width="0" layer="19" extent="1-1"/>
+<wire x1="19.32" y1="26.86" x2="19.32" y2="18.5" width="0.8128" layer="16"/>
+<wire x1="19.32" y1="18.5" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
+<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
+<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
+<contactref element="R3" pad="1"/>
+<wire x1="18.922" y1="18.5" x2="19.32" y2="18.5" width="0.8128" layer="16"/>
 </signal>
 </signals>
 <mfgpreviewcolors>

schematic/ECU.b#6

@@ -1105,6 +1105,12 @@ design rules under a new name.</description>
 <attribute name="SF_SKU" value="COM-07950" x="12.7" y="7.81" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="VALUE" x="12.7" y="2.222" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center"/>
 </element>
+<element name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" package="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M" x="2" y="-3.5" smashed="yes">
+<attribute name="NAME" x="0.73" y="-2.23" size="1.27" layer="25"/>
+<attribute name="SPICEMODEL" value="NONE" x="2" y="-3.5" size="1.778" layer="27" display="off"/>
+<attribute name="SPICEPREFIX" value="R" x="2" y="-3.5" size="1.778" layer="27" display="off"/>
+<attribute name="VALUE" x="0.73" y="-6.04" size="1.27" layer="27"/>
+</element>
 </elements>
 <signals>
 <signal name="3V3">
@@ -1146,6 +1152,25 @@ design rules under a new name.</description>
 <wire x1="7.45" y1="13.3792875" x2="8.0132" y2="12.8160875" width="0.8128" layer="16"/>
 <wire x1="8.0132" y1="12.8160875" x2="8.0132" y2="9.4732" width="0.8128" layer="16"/>
 <wire x1="8.0132" y1="9.4732" x2="5.08" y2="6.54" width="0.8128" layer="16"/>
+<contactref element="R3" pad="2"/>
+<wire x1="7.34" y1="74.28" x2="11.51" y2="76.39" width="0" layer="19" extent="1-1"/>
+<wire x1="11.43" y1="70.04" x2="7.34" y2="74.28" width="0" layer="19" extent="1-1"/>
+<wire x1="11.43" y1="67.7054" x2="11.43" y2="70.04" width="0" layer="19" extent="16-16"/>
+<wire x1="13.97" y1="62.42" x2="11.43" y2="67.7054" width="0" layer="19" extent="16-16"/>
+<wire x1="17.78" y1="62.572" x2="13.97" y2="62.42" width="0" layer="19" extent="16-16"/>
+<wire x1="2.54" y1="65.77" x2="11.43" y2="67.7054" width="0" layer="19" extent="16-16"/>
+<wire x1="2.54" y1="55.34" x2="2.54" y2="65.77" width="0" layer="19" extent="1-1"/>
+<wire x1="2.54" y1="45.18" x2="2.54" y2="55.34" width="0" layer="19" extent="1-1"/>
+<wire x1="6.29" y1="37.02" x2="2.54" y2="45.18" width="0" layer="19" extent="1-1"/>
+<wire x1="8.89" y1="31.94" x2="6.29" y2="37.02" width="0" layer="19" extent="1-1"/>
+<wire x1="14.9606" y1="21.2212" x2="8.89" y2="31.94" width="0" layer="19" extent="1-1"/>
+<wire x1="13.97" y1="17.97" x2="14.9606" y2="21.2212" width="0" layer="19" extent="1-1"/>
+<wire x1="17.62" y1="15.4254" x2="13.97" y2="17.97" width="0" layer="19" extent="16-16"/>
+<wire x1="7.45" y1="14.48" x2="13.97" y2="17.97" width="0" layer="19" extent="16-16"/>
+<wire x1="12.7" y1="7.81" x2="5.08" y2="6.54" width="0" layer="19" extent="1-1"/>
+<wire x1="15.95" y1="7.81" x2="12.7" y2="7.81" width="0" layer="19" extent="1-1"/>
+<wire x1="3.422" y1="-3.5" x2="5.08" y2="6.54" width="0" layer="19" extent="1-1"/>
+<wire x1="20.91" y1="42.27" x2="6.29" y2="37.02" width="0" layer="19" extent="1-16"/>
 </signal>
 <signal name="VIN">
 <contactref element="U$2" pad="15"/>
@@ -1402,7 +1427,11 @@ design rules under a new name.</description>
 <signal name="STOUT">
 <contactref element="J1" pad="2"/>
 <contactref element="J2" pad="4"/>
-<wire x1="21.86" y1="16.7" x2="19.32" y2="26.86" width="0" layer="19" extent="1-1"/>
+<wire x1="19.32" y1="26.86" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
+<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
+<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
+<contactref element="R3" pad="1"/>
+<wire x1="0.578" y1="-3.5" x2="21.86" y2="16.7" width="0" layer="19" extent="1-1"/>
 </signal>
 </signals>
 <mfgpreviewcolors>

schematic/ECU.b#7

@@ -1105,6 +1105,12 @@ design rules under a new name.</description>
 <attribute name="SF_SKU" value="COM-07950" x="12.7" y="7.81" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="VALUE" x="12.7" y="2.222" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center"/>
 </element>
+<element name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" package="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M" x="2" y="-3.5" smashed="yes">
+<attribute name="NAME" x="0.73" y="-2.23" size="1.27" layer="25"/>
+<attribute name="SPICEMODEL" value="NONE" x="2" y="-3.5" size="1.778" layer="27" display="off"/>
+<attribute name="SPICEPREFIX" value="R" x="2" y="-3.5" size="1.778" layer="27" display="off"/>
+<attribute name="VALUE" x="0.73" y="-6.04" size="1.27" layer="27"/>
+</element>
 </elements>
 <signals>
 <signal name="3V3">
@@ -1330,13 +1336,11 @@ design rules under a new name.</description>
 <wire x1="16.51" y1="48.76053125" x2="15.3924" y2="47.64293125" width="0.8128" layer="1"/>
 <wire x1="16.51" y1="58.42" x2="16.51" y2="48.76053125" width="0.8128" layer="1"/>
 <wire x1="15.3924" y1="25.2476" x2="19.05" y2="21.59" width="0.8128" layer="1"/>
-<wire x1="19.05" y1="21.59" x2="19.05" y2="18.92946875" width="0.8128" layer="1"/>
-<wire x1="19.85706875" y1="18.1224" x2="19.05" y2="18.92946875" width="0.8128" layer="1"/>
 <wire x1="15.3924" y1="47.64293125" x2="15.3924" y2="25.2476" width="0.8128" layer="1"/>
 <contactref element="J2" pad="3"/>
 <wire x1="21.86" y1="14.16" x2="20.59" y2="14.16" width="0.8128" layer="1"/>
-<wire x1="20.59" y1="14.16" x2="19.85706875" y2="14.89293125" width="0.8128" layer="1"/>
-<wire x1="19.85706875" y1="14.89293125" x2="19.85706875" y2="18.1224" width="0.8128" layer="1"/>
+<wire x1="20.59" y1="14.16" x2="19.05" y2="15.7" width="0.8128" layer="1"/>
+<wire x1="19.05" y1="15.7" x2="19.05" y2="21.59" width="0.8128" layer="1"/>
 </signal>
 <signal name="12V">
 <contactref element="R2" pad="2"/>
@@ -1404,7 +1408,11 @@ design rules under a new name.</description>
 <signal name="STOUT">
 <contactref element="J1" pad="2"/>
 <contactref element="J2" pad="4"/>
-<wire x1="21.86" y1="16.7" x2="19.32" y2="26.86" width="0" layer="19" extent="1-1"/>
+<wire x1="19.32" y1="26.86" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
+<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
+<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
+<contactref element="R3" pad="1"/>
+<wire x1="0.578" y1="-3.5" x2="21.86" y2="16.7" width="0" layer="19" extent="1-1"/>
 </signal>
 </signals>
 <mfgpreviewcolors>

schematic/ECU.b#8

@@ -1263,14 +1263,15 @@ design rules under a new name.</description>
 <contactref element="U$2" pad="6"/>
 <wire x1="6.29" y1="57.34" x2="12.7" y2="57.34" width="0.8128" layer="1"/>
 <wire x1="15.24" y1="54.8" x2="12.7" y2="57.34" width="0.8128" layer="1"/>
-<wire x1="20.32" y1="11.58" x2="17.78" y2="14.12" width="0.8128" layer="1"/>
 <wire x1="17.78" y1="21.27946875" x2="14.2748" y2="24.78466875" width="0.8128" layer="1"/>
 <wire x1="14.2748" y1="24.78466875" x2="14.2748" y2="48.1058625" width="0.8128" layer="1"/>
 <wire x1="14.2748" y1="48.1058625" x2="15.24" y2="49.0710625" width="0.8128" layer="1"/>
 <wire x1="15.24" y1="49.0710625" x2="15.24" y2="54.8" width="0.8128" layer="1"/>
-<wire x1="17.78" y1="14.12" x2="17.78" y2="21.27946875" width="0.8128" layer="1"/>
+<wire x1="17.78" y1="21.27946875" x2="17.78" y2="14.12" width="0.8128" layer="1"/>
 <contactref element="J2" pad="2"/>
-<wire x1="20.32" y1="11.58" x2="21.86" y2="11.62" width="0" layer="19" extent="1-1"/>
+<wire x1="20.2" y1="11.7" x2="21.78" y2="11.7" width="0.8128" layer="1"/>
+<wire x1="21.78" y1="11.7" x2="21.86" y2="11.62" width="0.8128" layer="1"/>
+<wire x1="17.78" y1="14.12" x2="20.2" y2="11.7" width="0.8128" layer="1"/>
 </signal>
 <signal name="SPIN">
 <contactref element="J2" pad="6"/>
@@ -1329,13 +1330,11 @@ design rules under a new name.</description>
 <wire x1="16.51" y1="48.76053125" x2="15.3924" y2="47.64293125" width="0.8128" layer="1"/>
 <wire x1="16.51" y1="58.42" x2="16.51" y2="48.76053125" width="0.8128" layer="1"/>
 <wire x1="15.3924" y1="25.2476" x2="19.05" y2="21.59" width="0.8128" layer="1"/>
-<wire x1="19.05" y1="21.59" x2="19.05" y2="18.92946875" width="0.8128" layer="1"/>
-<wire x1="19.85706875" y1="18.1224" x2="19.05" y2="18.92946875" width="0.8128" layer="1"/>
 <wire x1="15.3924" y1="47.64293125" x2="15.3924" y2="25.2476" width="0.8128" layer="1"/>
 <contactref element="J2" pad="3"/>
 <wire x1="21.86" y1="14.16" x2="20.59" y2="14.16" width="0.8128" layer="1"/>
-<wire x1="20.59" y1="14.16" x2="19.85706875" y2="14.89293125" width="0.8128" layer="1"/>
-<wire x1="19.85706875" y1="14.89293125" x2="19.85706875" y2="18.1224" width="0.8128" layer="1"/>
+<wire x1="20.59" y1="14.16" x2="19.05" y2="15.7" width="0.8128" layer="1"/>
+<wire x1="19.05" y1="15.7" x2="19.05" y2="21.59" width="0.8128" layer="1"/>
 </signal>
 <signal name="12V">
 <contactref element="R2" pad="2"/>
@@ -1403,7 +1402,9 @@ design rules under a new name.</description>
 <signal name="STOUT">
 <contactref element="J1" pad="2"/>
 <contactref element="J2" pad="4"/>
-<wire x1="21.86" y1="16.7" x2="19.32" y2="26.86" width="0" layer="19" extent="1-1"/>
+<wire x1="19.32" y1="26.86" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
+<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
+<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
 </signal>
 </signals>
 <mfgpreviewcolors>

schematic/ECU.b#9

@@ -1263,14 +1263,15 @@ design rules under a new name.</description>
 <contactref element="U$2" pad="6"/>
 <wire x1="6.29" y1="57.34" x2="12.7" y2="57.34" width="0.8128" layer="1"/>
 <wire x1="15.24" y1="54.8" x2="12.7" y2="57.34" width="0.8128" layer="1"/>
-<wire x1="20.32" y1="9.08" x2="17.78" y2="11.62" width="0.8128" layer="1"/>
 <wire x1="17.78" y1="21.27946875" x2="14.2748" y2="24.78466875" width="0.8128" layer="1"/>
 <wire x1="14.2748" y1="24.78466875" x2="14.2748" y2="48.1058625" width="0.8128" layer="1"/>
 <wire x1="14.2748" y1="48.1058625" x2="15.24" y2="49.0710625" width="0.8128" layer="1"/>
 <wire x1="15.24" y1="49.0710625" x2="15.24" y2="54.8" width="0.8128" layer="1"/>
-<wire x1="17.78" y1="11.62" x2="17.78" y2="21.27946875" width="0.8128" layer="1"/>
+<wire x1="17.78" y1="21.27946875" x2="17.78" y2="14.12" width="0.8128" layer="1"/>
 <contactref element="J2" pad="2"/>
-<wire x1="20.32" y1="9.08" x2="21.86" y2="11.62" width="0" layer="19" extent="1-1"/>
+<wire x1="20.2" y1="11.7" x2="21.78" y2="11.7" width="0.8128" layer="1"/>
+<wire x1="21.78" y1="11.7" x2="21.86" y2="11.62" width="0.8128" layer="1"/>
+<wire x1="17.78" y1="14.12" x2="20.2" y2="11.7" width="0.8128" layer="1"/>
 </signal>
 <signal name="SPIN">
 <contactref element="J2" pad="6"/>
@@ -1329,13 +1330,11 @@ design rules under a new name.</description>
 <wire x1="16.51" y1="48.76053125" x2="15.3924" y2="47.64293125" width="0.8128" layer="1"/>
 <wire x1="16.51" y1="58.42" x2="16.51" y2="48.76053125" width="0.8128" layer="1"/>
 <wire x1="15.3924" y1="25.2476" x2="19.05" y2="21.59" width="0.8128" layer="1"/>
-<wire x1="19.05" y1="21.59" x2="19.05" y2="18.92946875" width="0.8128" layer="1"/>
-<wire x1="19.85706875" y1="18.1224" x2="19.05" y2="18.92946875" width="0.8128" layer="1"/>
 <wire x1="15.3924" y1="47.64293125" x2="15.3924" y2="25.2476" width="0.8128" layer="1"/>
 <contactref element="J2" pad="3"/>
 <wire x1="21.86" y1="14.16" x2="20.59" y2="14.16" width="0.8128" layer="1"/>
-<wire x1="20.59" y1="14.16" x2="19.85706875" y2="14.89293125" width="0.8128" layer="1"/>
-<wire x1="19.85706875" y1="14.89293125" x2="19.85706875" y2="18.1224" width="0.8128" layer="1"/>
+<wire x1="20.59" y1="14.16" x2="19.05" y2="15.7" width="0.8128" layer="1"/>
+<wire x1="19.05" y1="15.7" x2="19.05" y2="21.59" width="0.8128" layer="1"/>
 </signal>
 <signal name="12V">
 <contactref element="R2" pad="2"/>
@@ -1373,12 +1372,6 @@ design rules under a new name.</description>
 <signal name="SPOUT">
 <contactref element="J7" pad="6"/>
 <contactref element="C3" pad="1"/>
-<wire x1="18.4746" y1="11.62" x2="17.62" y2="12.4746" width="0.8128" layer="16"/>
-<wire x1="22.54386875" y1="7.429" x2="23.511" y2="8.39613125" width="0.8128" layer="1"/>
-<wire x1="23.511" y1="8.39613125" x2="23.511" y2="10.76386875" width="0.8128" layer="1"/>
-<wire x1="12.8016" y1="13.74786875" x2="19.12046875" y2="7.429" width="0.8128" layer="1"/>
-<wire x1="19.12046875" y1="7.429" x2="22.54386875" y2="7.429" width="0.8128" layer="1"/>
-<wire x1="23.511" y1="10.76386875" x2="22.65486875" y2="11.62" width="0.8128" layer="1"/>
 <wire x1="12.8016" y1="23.90786875" x2="12.8016" y2="13.74786875" width="0.8128" layer="1"/>
 <wire x1="2.54" y1="30.67" x2="5.08" y2="28.13" width="0.8128" layer="16"/>
 <wire x1="7.62" y1="28.13" x2="8.57946875" y2="28.13" width="0.8128" layer="1"/>
@@ -1387,8 +1380,10 @@ design rules under a new name.</description>
 <via x="7.62" y="28.13" extent="1-16" drill="0.35"/>
 <wire x1="5.08" y1="28.13" x2="7.62" y2="28.13" width="0.8128" layer="16"/>
 <contactref element="J2" pad="1"/>
-<wire x1="22.65486875" y1="11.62" x2="21.86" y2="9.08" width="0" layer="19" extent="1-1"/>
-<wire x1="18.4746" y1="11.62" x2="22.65486875" y2="11.62" width="0" layer="19" extent="1-16"/>
+<wire x1="12.8016" y1="13.74786875" x2="17.46946875" y2="9.08" width="0.8128" layer="1"/>
+<wire x1="17.46946875" y1="9.08" x2="21.86" y2="9.08" width="0.8128" layer="1"/>
+<wire x1="21.0146" y1="9.08" x2="21.86" y2="9.08" width="0.8128" layer="16"/>
+<wire x1="17.62" y1="12.4746" x2="21.0146" y2="9.08" width="0.8128" layer="16"/>
 </signal>
 <signal name="SPK">
 <contactref element="U$2" pad="10"/>

schematic/ECU.brd

@@ -1211,6 +1211,13 @@ design rules under a new name.</description>
 <wire x1="2.54" y1="52.8" x2="6.2571" y2="52.8" width="0.8128" layer="16"/>
 <wire x1="6.2571" y1="52.8" x2="8.7571" y2="50.3" width="0.8128" layer="16"/>
 <wire x1="8.7571" y1="50.3" x2="8.7571" y2="49.8" width="0.8128" layer="16"/>
+<contactref element="J1" pad="2"/>
+<wire x1="8.7571" y1="49.8" x2="10.4571" y2="51.5" width="0.8128" layer="1"/>
+<wire x1="10.4571" y1="51.5" x2="14" y2="51.5" width="0.8128" layer="1"/>
+<via x="14" y="51.5" extent="1-16" drill="0.35"/>
+<wire x1="14" y1="51.5" x2="18.5" y2="47" width="0.8128" layer="16"/>
+<wire x1="18.5" y1="27.68" x2="19.32" y2="26.86" width="0.8128" layer="16"/>
+<wire x1="18.5" y1="47" x2="18.5" y2="27.68" width="0.8128" layer="16"/>
 </signal>
 <signal name="THIN">
 <contactref element="J5" pad="2"/>
@@ -1255,6 +1262,13 @@ design rules under a new name.</description>
 <wire x1="20.05" y1="43.6" x2="21.09" y2="44.64" width="0.8128" layer="1"/>
 <wire x1="21.09" y1="44.64" x2="22.19" y2="44.64" width="0.8128" layer="1"/>
 <wire x1="20.05" y1="29.67" x2="20.05" y2="43.6" width="0.8128" layer="1"/>
+<contactref element="J2" pad="4"/>
+<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
+<wire x1="18.922" y1="18.078" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
+<contactref element="R3" pad="1"/>
+<wire x1="18.922" y1="23.922" x2="18.922" y2="18.5" width="0.8128" layer="16"/>
+<wire x1="21.86" y1="26.86" x2="18.922" y2="23.922" width="0.8128" layer="16"/>
+<wire x1="18.922" y1="18.5" x2="18.922" y2="18.078" width="0.8128" layer="16"/>
 </signal>
 <signal name="BTN">
 <contactref element="D3" pad="2"/>
@@ -1406,16 +1420,6 @@ design rules under a new name.</description>
 <signal name="GND2">
 <contactref element="U$2" pad="19"/>
 </signal>
-<signal name="STOUT">
-<contactref element="J1" pad="2"/>
-<contactref element="J2" pad="4"/>
-<wire x1="19.32" y1="26.86" x2="19.32" y2="18.5" width="0.8128" layer="16"/>
-<wire x1="19.32" y1="18.5" x2="19.32" y2="17.68" width="0.8128" layer="16"/>
-<wire x1="20.3" y1="16.7" x2="21.86" y2="16.7" width="0.8128" layer="16"/>
-<wire x1="19.32" y1="17.68" x2="20.3" y2="16.7" width="0.8128" layer="16"/>
-<contactref element="R3" pad="1"/>
-<wire x1="18.922" y1="18.5" x2="19.32" y2="18.5" width="0.8128" layer="16"/>
-</signal>
 </signals>
 <mfgpreviewcolors>
 <mfgpreviewcolor name="soldermaskcolor" color="0xC8008000"/>

schematic/ECU.s#1

@@ -8904,9 +8904,9 @@ BUZZER</description>
 <attribute name="NAME" x="104.14" y="-2.54" size="1.778" layer="95" rot="R270" align="center"/>
 <attribute name="VALUE" x="93.98" y="-2.54" size="1.778" layer="95" rot="R270" align="center"/>
 </instance>
-<instance part="Q4" gate="G$1" x="114.3" y="15.24" smashed="yes" rot="MR180">
-<attribute name="NAME" x="120.65" y="13.97" size="1.778" layer="95" rot="MR180"/>
-<attribute name="VALUE" x="120.65" y="16.51" size="1.778" layer="96" rot="MR180"/>
+<instance part="Q4" gate="G$1" x="111.76" y="15.24" smashed="yes" rot="MR180">
+<attribute name="NAME" x="118.11" y="13.97" size="1.778" layer="95" rot="MR180"/>
+<attribute name="VALUE" x="118.11" y="16.51" size="1.778" layer="96" rot="MR180"/>
 </instance>
 <instance part="D3" gate="G$1" x="81.28" y="-17.78" smashed="yes">
 <attribute name="NAME" x="81.28" y="-12.7" size="1.778" layer="95" align="center"/>
@@ -8937,9 +8937,9 @@ BUZZER</description>
 <attribute name="NAME" x="-35.306" y="48.26" size="1.778" layer="95" font="vector" rot="MR270"/>
 <attribute name="VALUE" x="-30.48" y="40.386" size="1.778" layer="96" font="vector" rot="MR270"/>
 </instance>
-<instance part="R3" gate="G$1" x="129.54" y="20.32" smashed="yes" rot="R180">
-<attribute name="NAME" x="133.35" y="18.8214" size="1.778" layer="95" rot="R180"/>
-<attribute name="VALUE" x="133.35" y="23.622" size="1.778" layer="96" rot="R180"/>
+<instance part="R3" gate="G$1" x="132.08" y="22.86" smashed="yes" rot="R180">
+<attribute name="NAME" x="135.89" y="21.3614" size="1.778" layer="95" rot="R180"/>
+<attribute name="VALUE" x="135.89" y="26.162" size="1.778" layer="96" rot="R180"/>
 </instance>
 </instances>
 <busses>
@@ -9014,8 +9014,8 @@ BUZZER</description>
 </segment>
 <segment>
 <pinref part="R3" gate="G$1" pin="2"/>
-<wire x1="124.46" y1="20.32" x2="119.38" y2="20.32" width="0.1524" layer="91"/>
-<label x="119.38" y="20.32" size="1.778" layer="95"/>
+<wire x1="127" y1="22.86" x2="121.92" y2="22.86" width="0.1524" layer="91"/>
+<label x="121.92" y="22.86" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="VIN" class="0">
@@ -9026,8 +9026,8 @@ BUZZER</description>
 </segment>
 <segment>
 <pinref part="Q4" gate="G$1" pin="D"/>
-<wire x1="116.84" y1="20.32" x2="116.84" y2="22.86" width="0.1524" layer="91"/>
-<wire x1="116.84" y1="22.86" x2="63.5" y2="22.86" width="0.1524" layer="91"/>
+<wire x1="114.3" y1="20.32" x2="114.3" y2="22.86" width="0.1524" layer="91"/>
+<wire x1="114.3" y1="22.86" x2="63.5" y2="22.86" width="0.1524" layer="91"/>
 <label x="63.5" y="22.86" size="1.778" layer="95"/>
 </segment>
 </net>
@@ -9238,11 +9238,11 @@ BUZZER</description>
 <segment>
 <pinref part="R2" gate="G$1" pin="2"/>
 <pinref part="Q4" gate="G$1" pin="S"/>
-<wire x1="116.84" y1="10.16" x2="116.84" y2="7.62" width="0.1524" layer="91"/>
-<wire x1="116.84" y1="7.62" x2="111.76" y2="7.62" width="0.1524" layer="91"/>
+<wire x1="114.3" y1="10.16" x2="114.3" y2="7.62" width="0.1524" layer="91"/>
+<wire x1="114.3" y1="7.62" x2="111.76" y2="7.62" width="0.1524" layer="91"/>
 <pinref part="J3" gate="G$1" pin="1"/>
-<wire x1="137.16" y1="7.62" x2="116.84" y2="7.62" width="0.1524" layer="91"/>
-<junction x="116.84" y="7.62"/>
+<wire x1="137.16" y1="7.62" x2="114.3" y2="7.62" width="0.1524" layer="91"/>
+<junction x="114.3" y="7.62"/>
 <label x="119.38" y="7.62" size="1.778" layer="95"/>
 </segment>
 </net>
@@ -9253,7 +9253,7 @@ BUZZER</description>
 <pinref part="Q2" gate="G$1" pin="D"/>
 <wire x1="99.06" y1="12.7" x2="88.9" y2="12.7" width="0.1524" layer="91"/>
 <junction x="99.06" y="12.7"/>
-<wire x1="111.76" y1="12.7" x2="99.06" y2="12.7" width="0.1524" layer="91"/>
+<wire x1="109.22" y1="12.7" x2="99.06" y2="12.7" width="0.1524" layer="91"/>
 <pinref part="D2" gate="G$1" pin="A"/>
 <wire x1="99.06" y1="2.54" x2="99.06" y2="7.62" width="0.1524" layer="91"/>
 <junction x="99.06" y="12.7"/>
@@ -9305,8 +9305,7 @@ BUZZER</description>
 <net name="STOUT" class="0">
 <segment>
 <pinref part="J1" gate="G$1" pin="2"/>
-<wire x1="137.16" y1="27.94" x2="137.16" y2="20.32" width="0.1524" layer="91"/>
-<wire x1="137.16" y1="20.32" x2="134.62" y2="20.32" width="0.1524" layer="91"/>
+<wire x1="137.16" y1="27.94" x2="137.16" y2="22.86" width="0.1524" layer="91"/>
 <label x="129.54" y="27.94" size="1.778" layer="95"/>
 <pinref part="R3" gate="G$1" pin="1"/>
 <wire x1="137.16" y1="27.94" x2="129.54" y2="27.94" width="0.1524" layer="91"/>

schematic/ECU.s#2

@@ -8937,9 +8937,9 @@ BUZZER</description>
 <attribute name="NAME" x="-35.306" y="48.26" size="1.778" layer="95" font="vector" rot="MR270"/>
 <attribute name="VALUE" x="-30.48" y="40.386" size="1.778" layer="96" font="vector" rot="MR270"/>
 </instance>
-<instance part="R3" gate="G$1" x="121.92" y="27.94" smashed="yes" rot="R180">
-<attribute name="NAME" x="125.73" y="26.4414" size="1.778" layer="95" rot="R180"/>
-<attribute name="VALUE" x="125.73" y="31.242" size="1.778" layer="96" rot="R180"/>
+<instance part="R3" gate="G$1" x="129.54" y="20.32" smashed="yes" rot="R180">
+<attribute name="NAME" x="133.35" y="18.8214" size="1.778" layer="95" rot="R180"/>
+<attribute name="VALUE" x="133.35" y="23.622" size="1.778" layer="96" rot="R180"/>
 </instance>
 </instances>
 <busses>
@@ -9014,8 +9014,8 @@ BUZZER</description>
 </segment>
 <segment>
 <pinref part="R3" gate="G$1" pin="2"/>
-<wire x1="116.84" y1="27.94" x2="109.22" y2="27.94" width="0.1524" layer="91"/>
-<label x="109.22" y="27.94" size="1.778" layer="95"/>
+<wire x1="124.46" y1="20.32" x2="119.38" y2="20.32" width="0.1524" layer="91"/>
+<label x="119.38" y="20.32" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="VIN" class="0">
@@ -9305,9 +9305,12 @@ BUZZER</description>
 <net name="STOUT" class="0">
 <segment>
 <pinref part="J1" gate="G$1" pin="2"/>
-<wire x1="137.16" y1="27.94" x2="127" y2="27.94" width="0.1524" layer="91"/>
+<wire x1="137.16" y1="27.94" x2="137.16" y2="20.32" width="0.1524" layer="91"/>
+<wire x1="137.16" y1="20.32" x2="134.62" y2="20.32" width="0.1524" layer="91"/>
 <label x="129.54" y="27.94" size="1.778" layer="95"/>
 <pinref part="R3" gate="G$1" pin="1"/>
+<wire x1="137.16" y1="27.94" x2="129.54" y2="27.94" width="0.1524" layer="91"/>
+<junction x="137.16" y="27.94"/>
 </segment>
 <segment>
 <pinref part="J2" gate="G$1" pin="4"/>

schematic/ECU.s#3

@@ -9012,6 +9012,11 @@ BUZZER</description>
 <wire x1="27.94" y1="86.36" x2="10.16" y2="86.36" width="0.1524" layer="91"/>
 <label x="10.16" y="86.36" size="1.778" layer="95"/>
 </segment>
+<segment>
+<pinref part="R3" gate="G$1" pin="2"/>
+<wire x1="116.84" y1="27.94" x2="109.22" y2="27.94" width="0.1524" layer="91"/>
+<label x="109.22" y="27.94" size="1.778" layer="95"/>
+</segment>
 </net>
 <net name="VIN" class="0">
 <segment>

schematic/ECU.s#4

@@ -8853,6 +8853,7 @@ BUZZER</description>
 <part name="Q1" library="Transistor" library_urn="urn:adsk.eagle:library:16378713" deviceset="NMOSFET" device="SOT23" package3d_urn="urn:adsk.eagle:package:28738/2"/>
 <part name="U$2" library="regulator" deviceset="ARDUINO" device="ARDUINO_NANO" package3d_urn="urn:adsk.eagle:package:21849926/1"/>
 <part name="LS1" library="SparkFun-Electromechanical" library_urn="urn:adsk.eagle:library:516" deviceset="BUZZER" device="-PTH_KIT" package3d_urn="urn:adsk.eagle:package:38556/1"/>
+<part name="R3" library="eagle-ltspice" library_urn="urn:adsk.eagle:library:217" deviceset="R" device="R1206" package3d_urn="urn:adsk.eagle:package:13301/1" value="1M"/>
 </parts>
 <sheets>
 <sheet>
@@ -8936,6 +8937,10 @@ BUZZER</description>
 <attribute name="NAME" x="-35.306" y="48.26" size="1.778" layer="95" font="vector" rot="MR270"/>
 <attribute name="VALUE" x="-30.48" y="40.386" size="1.778" layer="96" font="vector" rot="MR270"/>
 </instance>
+<instance part="R3" gate="G$1" x="121.92" y="27.94" smashed="yes" rot="R180">
+<attribute name="NAME" x="125.73" y="26.4414" size="1.778" layer="95" rot="R180"/>
+<attribute name="VALUE" x="125.73" y="31.242" size="1.778" layer="96" rot="R180"/>
+</instance>
 </instances>
 <busses>
 </busses>
@@ -9295,8 +9300,9 @@ BUZZER</description>
 <net name="STOUT" class="0">
 <segment>
 <pinref part="J1" gate="G$1" pin="2"/>
-<wire x1="137.16" y1="27.94" x2="129.54" y2="27.94" width="0.1524" layer="91"/>
+<wire x1="137.16" y1="27.94" x2="127" y2="27.94" width="0.1524" layer="91"/>
 <label x="129.54" y="27.94" size="1.778" layer="95"/>
+<pinref part="R3" gate="G$1" pin="1"/>
 </segment>
 <segment>
 <pinref part="J2" gate="G$1" pin="4"/>

schematic/ECU.s#5

@@ -9169,7 +9169,6 @@ BUZZER</description>
 <pinref part="J2" gate="G$1" pin="6"/>
 <label x="132.08" y="43.18" size="1.778" layer="95"/>
 <pinref part="Q5" gate="G$1" pin="G"/>
-<label x="119.38" y="43.18" size="1.778" layer="95"/>
 <wire x1="99.06" y1="48.26" x2="101.6" y2="48.26" width="0.1524" layer="91"/>
 <wire x1="101.6" y1="48.26" x2="101.6" y2="43.18" width="0.1524" layer="91"/>
 <wire x1="101.6" y1="43.18" x2="137.16" y2="43.18" width="0.1524" layer="91"/>

schematic/ECU.s#6

@@ -9190,7 +9190,7 @@ BUZZER</description>
 <wire x1="45.72" y1="60.96" x2="106.68" y2="60.96" width="0.1524" layer="91"/>
 <wire x1="106.68" y1="60.96" x2="106.68" y2="45.72" width="0.1524" layer="91"/>
 <pinref part="J2" gate="G$1" pin="5"/>
-<label x="127" y="45.72" size="1.778" layer="95"/>
+<label x="124.46" y="45.72" size="1.778" layer="95"/>
 <wire x1="106.68" y1="45.72" x2="137.16" y2="45.72" width="0.1524" layer="91"/>
 <pinref part="U$2" gate="G$1" pin="D4"/>
 </segment>

schematic/ECU.s#7

@@ -9159,9 +9159,9 @@ BUZZER</description>
 <pinref part="U$2" gate="G$1" pin="A2"/>
 </segment>
 <segment>
-<pinref part="J2" gate="G$1" pin="1"/>
-<wire x1="137.16" y1="55.88" x2="129.54" y2="55.88" width="0.1524" layer="91"/>
-<label x="132.08" y="55.88" size="1.778" layer="95"/>
+<pinref part="J2" gate="G$1" pin="2"/>
+<wire x1="137.16" y1="53.34" x2="129.54" y2="53.34" width="0.1524" layer="91"/>
+<label x="132.08" y="53.34" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="SPIN" class="0">
@@ -9278,9 +9278,9 @@ BUZZER</description>
 <label x="-25.4" y="55.88" size="1.778" layer="95"/>
 </segment>
 <segment>
-<pinref part="J2" gate="G$1" pin="2"/>
-<wire x1="137.16" y1="53.34" x2="129.54" y2="53.34" width="0.1524" layer="91"/>
-<label x="129.54" y="53.34" size="1.778" layer="95"/>
+<pinref part="J2" gate="G$1" pin="1"/>
+<wire x1="137.16" y1="55.88" x2="129.54" y2="55.88" width="0.1524" layer="91"/>
+<label x="129.54" y="55.88" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="SPK" class="0">

schematic/ECU.s#8

@@ -8859,17 +8859,17 @@ BUZZER</description>
 <plain>
 </plain>
 <instances>
-<instance part="J1" gate="G$1" x="81.28" y="53.34" smashed="yes" rot="R180">
-<attribute name="VALUE" x="83.82" y="58.166" size="1.778" layer="96" font="vector" rot="R180"/>
-<attribute name="NAME" x="83.82" y="47.752" size="1.778" layer="95" font="vector" rot="R180"/>
+<instance part="J1" gate="G$1" x="144.78" y="30.48" smashed="yes" rot="R180">
+<attribute name="VALUE" x="147.32" y="35.306" size="1.778" layer="96" font="vector" rot="R180"/>
+<attribute name="NAME" x="147.32" y="24.892" size="1.778" layer="95" font="vector" rot="R180"/>
 </instance>
 <instance part="J2" gate="G$1" x="142.24" y="50.8" smashed="yes" rot="R180">
 <attribute name="VALUE" x="147.32" y="60.706" size="1.778" layer="96" font="vector" rot="R180"/>
 <attribute name="NAME" x="147.32" y="40.132" size="1.778" layer="95" font="vector" rot="R180"/>
 </instance>
-<instance part="J3" gate="G$1" x="132.08" y="7.62" smashed="yes" rot="R180">
-<attribute name="VALUE" x="134.62" y="12.446" size="1.778" layer="96" font="vector" rot="R180"/>
-<attribute name="NAME" x="134.62" y="2.032" size="1.778" layer="95" font="vector" rot="R180"/>
+<instance part="J3" gate="G$1" x="144.78" y="7.62" smashed="yes" rot="R180">
+<attribute name="VALUE" x="147.32" y="12.446" size="1.778" layer="96" font="vector" rot="R180"/>
+<attribute name="NAME" x="147.32" y="2.032" size="1.778" layer="95" font="vector" rot="R180"/>
 </instance>
 <instance part="J4" gate="G$1" x="30.48" y="101.6" smashed="yes" rot="R270">
 <attribute name="VALUE" x="25.4" y="104.394" size="1.778" layer="96" font="vector"/>
@@ -8915,8 +8915,8 @@ BUZZER</description>
 <attribute name="NAME" x="91.44" y="-8.636" size="1.778" layer="95" font="vector" align="bottom-center"/>
 <attribute name="VALUE" x="91.44" y="-10.668" size="1.778" layer="96" font="vector" align="top-center"/>
 </instance>
-<instance part="Q5" gate="G$1" x="96.52" y="45.72" smashed="yes" rot="MR0">
-<attribute name="NAME" x="90.17" y="46.99" size="1.778" layer="95" rot="MR0"/>
+<instance part="Q5" gate="G$1" x="96.52" y="50.8" smashed="yes" rot="MR0">
+<attribute name="NAME" x="90.17" y="52.07" size="1.778" layer="95" rot="MR0"/>
 </instance>
 <instance part="J7" gate="G$1" x="-30.48" y="63.5" smashed="yes" rot="MR180">
 <attribute name="VALUE" x="-35.56" y="73.406" size="1.778" layer="96" font="vector" rot="MR180"/>
@@ -8952,9 +8952,9 @@ BUZZER</description>
 </segment>
 <segment>
 <pinref part="Q5" gate="G$1" pin="S"/>
-<wire x1="93.98" y1="40.64" x2="93.98" y2="35.56" width="0.1524" layer="91"/>
-<label x="81.28" y="35.56" size="1.778" layer="95"/>
-<wire x1="78.74" y1="35.56" x2="93.98" y2="35.56" width="0.1524" layer="91"/>
+<wire x1="93.98" y1="45.72" x2="93.98" y2="43.18" width="0.1524" layer="91"/>
+<label x="86.36" y="43.18" size="1.778" layer="95"/>
+<wire x1="83.82" y1="43.18" x2="93.98" y2="43.18" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="R1" gate="G$1" pin="1"/>
@@ -8973,8 +8973,8 @@ BUZZER</description>
 </segment>
 <segment>
 <pinref part="J3" gate="G$1" pin="2"/>
-<wire x1="124.46" y1="5.08" x2="116.84" y2="5.08" width="0.1524" layer="91"/>
-<label x="119.38" y="5.08" size="1.778" layer="95"/>
+<wire x1="137.16" y1="5.08" x2="129.54" y2="5.08" width="0.1524" layer="91"/>
+<label x="132.08" y="5.08" size="1.778" layer="95"/>
 </segment>
 <segment>
 <wire x1="124.46" y1="71.12" x2="124.46" y2="68.58" width="0.1524" layer="91"/>
@@ -9123,7 +9123,7 @@ BUZZER</description>
 <segment>
 <label x="45.72" y="58.42" size="1.778" layer="95"/>
 <pinref part="Q5" gate="G$1" pin="D"/>
-<wire x1="93.98" y1="50.8" x2="93.98" y2="58.42" width="0.1524" layer="91"/>
+<wire x1="93.98" y1="55.88" x2="93.98" y2="58.42" width="0.1524" layer="91"/>
 <label x="93.98" y="50.8" size="1.778" layer="95"/>
 <wire x1="45.72" y1="58.42" x2="93.98" y2="58.42" width="0.1524" layer="91"/>
 <pinref part="U$2" gate="G$1" pin="D3"/>
@@ -9132,12 +9132,12 @@ BUZZER</description>
 <net name="ST" class="0">
 <segment>
 <pinref part="J1" gate="G$1" pin="1"/>
-<label x="71.12" y="53.34" size="1.778" layer="95"/>
+<label x="134.62" y="30.48" size="1.778" layer="95"/>
 <label x="45.72" y="55.88" size="1.778" layer="95"/>
-<wire x1="73.66" y1="53.34" x2="63.5" y2="53.34" width="0.1524" layer="91"/>
-<wire x1="63.5" y1="55.88" x2="45.72" y2="55.88" width="0.1524" layer="91"/>
+<wire x1="137.16" y1="30.48" x2="66.04" y2="30.48" width="0.1524" layer="91"/>
+<wire x1="66.04" y1="55.88" x2="45.72" y2="55.88" width="0.1524" layer="91"/>
 <pinref part="U$2" gate="G$1" pin="D2"/>
-<wire x1="63.5" y1="55.88" x2="63.5" y2="53.34" width="0.1524" layer="91"/>
+<wire x1="66.04" y1="55.88" x2="66.04" y2="30.48" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="BTN" class="0">
@@ -9170,7 +9170,9 @@ BUZZER</description>
 <label x="132.08" y="43.18" size="1.778" layer="95"/>
 <pinref part="Q5" gate="G$1" pin="G"/>
 <label x="119.38" y="43.18" size="1.778" layer="95"/>
-<wire x1="99.06" y1="43.18" x2="137.16" y2="43.18" width="0.1524" layer="91"/>
+<wire x1="99.06" y1="48.26" x2="101.6" y2="48.26" width="0.1524" layer="91"/>
+<wire x1="101.6" y1="48.26" x2="101.6" y2="43.18" width="0.1524" layer="91"/>
+<wire x1="101.6" y1="43.18" x2="137.16" y2="43.18" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="LEDCTL" class="0">
@@ -9185,11 +9187,11 @@ BUZZER</description>
 <net name="STLEDCTL" class="0">
 <segment>
 <label x="45.72" y="60.96" size="1.778" layer="95"/>
-<wire x1="45.72" y1="60.96" x2="101.6" y2="60.96" width="0.1524" layer="91"/>
-<wire x1="101.6" y1="60.96" x2="101.6" y2="45.72" width="0.1524" layer="91"/>
+<wire x1="45.72" y1="60.96" x2="106.68" y2="60.96" width="0.1524" layer="91"/>
+<wire x1="106.68" y1="60.96" x2="106.68" y2="45.72" width="0.1524" layer="91"/>
 <pinref part="J2" gate="G$1" pin="5"/>
 <label x="127" y="45.72" size="1.778" layer="95"/>
-<wire x1="101.6" y1="45.72" x2="137.16" y2="45.72" width="0.1524" layer="91"/>
+<wire x1="106.68" y1="45.72" x2="137.16" y2="45.72" width="0.1524" layer="91"/>
 <pinref part="U$2" gate="G$1" pin="D4"/>
 </segment>
 </net>
@@ -9230,7 +9232,7 @@ BUZZER</description>
 <wire x1="116.84" y1="10.16" x2="116.84" y2="7.62" width="0.1524" layer="91"/>
 <wire x1="116.84" y1="7.62" x2="111.76" y2="7.62" width="0.1524" layer="91"/>
 <pinref part="J3" gate="G$1" pin="1"/>
-<wire x1="124.46" y1="7.62" x2="116.84" y2="7.62" width="0.1524" layer="91"/>
+<wire x1="137.16" y1="7.62" x2="116.84" y2="7.62" width="0.1524" layer="91"/>
 <junction x="116.84" y="7.62"/>
 <label x="119.38" y="7.62" size="1.778" layer="95"/>
 </segment>
@@ -9294,8 +9296,8 @@ BUZZER</description>
 <net name="STOUT" class="0">
 <segment>
 <pinref part="J1" gate="G$1" pin="2"/>
-<wire x1="73.66" y1="50.8" x2="66.04" y2="50.8" width="0.1524" layer="91"/>
-<label x="66.04" y="50.8" size="1.778" layer="95"/>
+<wire x1="137.16" y1="27.94" x2="129.54" y2="27.94" width="0.1524" layer="91"/>
+<label x="129.54" y="27.94" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="J2" gate="G$1" pin="4"/>

schematic/ECU.s#9

@@ -8977,9 +8977,10 @@ BUZZER</description>
 <label x="119.38" y="5.08" size="1.778" layer="95"/>
 </segment>
 <segment>
-<wire x1="124.46" y1="71.12" x2="124.46" y2="66.04" width="0.1524" layer="91"/>
+<wire x1="124.46" y1="71.12" x2="124.46" y2="68.58" width="0.1524" layer="91"/>
 <pinref part="Q1" gate="G$1" pin="S"/>
-<wire x1="121.92" y1="66.04" x2="124.46" y2="66.04" width="0.1524" layer="91"/>
+<wire x1="114.3" y1="68.58" x2="124.46" y2="68.58" width="0.1524" layer="91"/>
+<label x="114.3" y="68.58" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="J5" gate="J$1" pin="3"/>

schematic/ECU.sch

@@ -8937,9 +8937,9 @@ BUZZER</description>
 <attribute name="NAME" x="-35.306" y="48.26" size="1.778" layer="95" font="vector" rot="MR270"/>
 <attribute name="VALUE" x="-30.48" y="40.386" size="1.778" layer="96" font="vector" rot="MR270"/>
 </instance>
-<instance part="R3" gate="G$1" x="132.08" y="22.86" smashed="yes" rot="R180">
-<attribute name="NAME" x="135.89" y="21.3614" size="1.778" layer="95" rot="R180"/>
-<attribute name="VALUE" x="135.89" y="26.162" size="1.778" layer="96" rot="R180"/>
+<instance part="R3" gate="G$1" x="121.92" y="35.56" smashed="yes" rot="R180">
+<attribute name="NAME" x="125.73" y="34.0614" size="1.778" layer="95" rot="R180"/>
+<attribute name="VALUE" x="125.73" y="38.862" size="1.778" layer="96" rot="R180"/>
 </instance>
 </instances>
 <busses>
@@ -9014,8 +9014,8 @@ BUZZER</description>
 </segment>
 <segment>
 <pinref part="R3" gate="G$1" pin="2"/>
-<wire x1="127" y1="22.86" x2="121.92" y2="22.86" width="0.1524" layer="91"/>
-<label x="121.92" y="22.86" size="1.778" layer="95"/>
+<wire x1="116.84" y1="35.56" x2="106.68" y2="35.56" width="0.1524" layer="91"/>
+<label x="109.22" y="35.56" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="VIN" class="0">
@@ -9096,6 +9096,11 @@ BUZZER</description>
 <wire x1="25.4" y1="93.98" x2="10.16" y2="93.98" width="0.1524" layer="91"/>
 <label x="10.16" y="93.98" size="1.778" layer="95"/>
 </segment>
+<segment>
+<pinref part="J1" gate="G$1" pin="2"/>
+<label x="129.54" y="27.94" size="1.778" layer="95"/>
+<wire x1="137.16" y1="27.94" x2="129.54" y2="27.94" width="0.1524" layer="91"/>
+</segment>
 </net>
 <net name="THIN" class="0">
 <segment>
@@ -9144,10 +9149,20 @@ BUZZER</description>
 <pinref part="J1" gate="G$1" pin="1"/>
 <label x="134.62" y="30.48" size="1.778" layer="95"/>
 <label x="45.72" y="55.88" size="1.778" layer="95"/>
-<wire x1="137.16" y1="30.48" x2="66.04" y2="30.48" width="0.1524" layer="91"/>
+<wire x1="137.16" y1="30.48" x2="134.62" y2="30.48" width="0.1524" layer="91"/>
+<wire x1="134.62" y1="30.48" x2="66.04" y2="30.48" width="0.1524" layer="91"/>
 <wire x1="66.04" y1="55.88" x2="45.72" y2="55.88" width="0.1524" layer="91"/>
 <pinref part="U$2" gate="G$1" pin="D2"/>
 <wire x1="66.04" y1="55.88" x2="66.04" y2="30.48" width="0.1524" layer="91"/>
+<pinref part="R3" gate="G$1" pin="1"/>
+<wire x1="127" y1="35.56" x2="134.62" y2="35.56" width="0.1524" layer="91"/>
+<wire x1="134.62" y1="35.56" x2="134.62" y2="30.48" width="0.1524" layer="91"/>
+<junction x="134.62" y="30.48"/>
+</segment>
+<segment>
+<pinref part="J2" gate="G$1" pin="4"/>
+<wire x1="137.16" y1="48.26" x2="129.54" y2="48.26" width="0.1524" layer="91"/>
+<label x="129.54" y="48.26" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="BTN" class="0">
@@ -9302,21 +9317,6 @@ BUZZER</description>
 <wire x1="-27.94" y1="45.72" x2="2.54" y2="45.72" width="0.1524" layer="91"/>
 </segment>
 </net>
-<net name="STOUT" class="0">
-<segment>
-<pinref part="J1" gate="G$1" pin="2"/>
-<wire x1="137.16" y1="27.94" x2="137.16" y2="22.86" width="0.1524" layer="91"/>
-<label x="129.54" y="27.94" size="1.778" layer="95"/>
-<pinref part="R3" gate="G$1" pin="1"/>
-<wire x1="137.16" y1="27.94" x2="129.54" y2="27.94" width="0.1524" layer="91"/>
-<junction x="137.16" y="27.94"/>
-</segment>
-<segment>
-<pinref part="J2" gate="G$1" pin="4"/>
-<wire x1="137.16" y1="48.26" x2="129.54" y2="48.26" width="0.1524" layer="91"/>
-<label x="129.54" y="48.26" size="1.778" layer="95"/>
-</segment>
-</net>
 </nets>
 </sheet>
 </sheets>